liu.seSearch for publications in DiVA
Endre søk
Link to record
Permanent link

Direct link
BETA
Ye, Qin-Zhong
Alternativa namn
Publikasjoner (10 av 12) Visa alla publikasjoner
Serban (Craciunescu), A., Morales, O., Petersson, T., Kalvér, H. & Ye, Q.-Z. (2018). Multi-Port Front-End and DSP Co-Design for Vital Signs Detector. In: : . Paper presented at Swedish Microwave Days, GigaHertz Symposium, Lund, Sweden, May 24-25, 2018. Linköping: Linköping University Electronic Press
Åpne denne publikasjonen i ny fane eller vindu >>Multi-Port Front-End and DSP Co-Design for Vital Signs Detector
Vise andre…
2018 (engelsk)Konferansepaper, Oral presentation only (Fagfellevurdert)
Abstract [en]

Controlled wave interferometry within the passive multi-port (six-port) correlator with capability to accurately process phase information is shown to be a useful technique for microwave radar and wireless sensor applications. In this paper, the co-design and implementation of a complete hardware-software Doppler radar modular system for vital signs detection using the multi-port technology is presented. In contrast to multi-port radio applications, the challenge is to demonstrate the possibility to detect weak, Hz-range frequency signals.

sted, utgiver, år, opplag, sider
Linköping: Linköping University Electronic Press, 2018
Emneord
multi-port radar, vital signs detection, co-design, digital signal processing
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-150613 (URN)
Konferanse
Swedish Microwave Days, GigaHertz Symposium, Lund, Sweden, May 24-25, 2018
Tilgjengelig fra: 2018-08-29 Laget: 2018-08-29 Sist oppdatert: 2019-06-17bibliografisk kontrollert
Zhang, J., Huynh, A., Huss, P., Ye, Q.-z. & Gong, S. (2013). A Web-based Remote Indoor Climate Control System Based on Wireless Sensor Network. International Journal of Sensors and Sensor Networks, 1(3), 32-40
Åpne denne publikasjonen i ny fane eller vindu >>A Web-based Remote Indoor Climate Control System Based on Wireless Sensor Network
Vise andre…
2013 (engelsk)Inngår i: International Journal of Sensors and Sensor Networks, ISSN 2329-1796, Vol. 1, nr 3, s. 32-40Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

This paper presents the design and implementation of a web-based wireless indoor climate control system. The user interface of the system is implemented as a web service. People can login to the website and remotely control the indoor climate of different locations. A wireless sensor network is deployed in each location to execute control commands. A gateway is implemented to synchronize the information between the wireless sensor network and the web service. The gateway software also includes scheduling function and different control algorithms to improve the control result. Additionally, the system security and availability are highly considered in this system. The gateway software implements a warning function which sends warning messages when emergency happens. Finally, the whole wireless control system architecture is modularly designed. It is easy to add different control applications or different control algorithms into the system.

sted, utgiver, år, opplag, sider
Science Publishing Group, 2013
Emneord
Remote Control, Indoor Climate, Wireless Sensor Network
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-102588 (URN)
Merknad

DOI dos not work: 

Tilgjengelig fra: 2013-12-16 Laget: 2013-12-16 Sist oppdatert: 2018-07-19bibliografisk kontrollert
Zhang, J., Ye, Q.-z., Huynh, A. & Gong, S. (2013). Design and Implementation of a Truly Battery-Driven ZigBee Wireless Sensor Network.
Åpne denne publikasjonen i ny fane eller vindu >>Design and Implementation of a Truly Battery-Driven ZigBee Wireless Sensor Network
2013 (engelsk)Manuskript (preprint) (Annet vitenskapelig)
Abstract [en]

As defined by the ZigBee standard, a router should be mains-powered in order to maintain the mesh feature of the ZigBee network. This study presents a method which allows the ZigBee router goes into sleep mode periodically and keeps the same mesh feature during the ZigBee communications. In this study, the standard ZigBee communication is separated into two synchronized clusters. The first cluster includes the communication between end devices and the associated router. The sensor message report time of different end devices are scheduled by the router in different collision-free time slots within a predefined time interval. The second cluster includes the mesh communication between routers and the concentrator. All routers are synchronized so that they wake up at the same time to maintain the mesh feature. In order to maximize the router battery lifetime, algorithms are developed so that the concentrator communicates with routers according to the network routing records. Additionally, in order to recover the broken communication, special logics are implemented in routers and end device so that they can rejoin the wireless sensor network with low power consumption. Finally, a battery lifetime model is presented which can be utilized to calculate battery lifetime of the ZigBee router under different network configurations.

Emneord
Low Power, ZigBee Router, Wireless Sensor Network, High Availability
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-102590 (URN)
Tilgjengelig fra: 2013-12-16 Laget: 2013-12-16 Sist oppdatert: 2013-12-16bibliografisk kontrollert
Zhang, J., Huynh, A., Ye, Q.-z. & Gong, S. (2011). A Communication Reliability Enhancement Framework for Wireless Sensor Network Using the ZigBee Protocol. Sensors & Transducers Journal, 135(12), 42-56
Åpne denne publikasjonen i ny fane eller vindu >>A Communication Reliability Enhancement Framework for Wireless Sensor Network Using the ZigBee Protocol
2011 (engelsk)Inngår i: Sensors & Transducers Journal, ISSN 2306-8515, E-ISSN 1726-5479, Vol. 135, nr 12, s. 42-56Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

This paper presents the methods for the ZigBee network reliability enhancement and the battery life time optimization. The paper begins with the introduction of the common communication problems due to the broken links between sensor module and message relay, or between different relays. Extra message hand shake mechanisms are added to solve different problem mentioned at the beginning. Finally, a general purpose reliability enhancement component is developed as a state machine which can be work together with ZigBee protocol to enhance ZigBee network communication reliability. Moreover, the battery life time of the sensor module during link broken is considerably increased after the enhancement.

sted, utgiver, år, opplag, sider
International Frequency Sensors Association (IFSA), 2011
Emneord
Communication reliability enhancement, ZigBee, Reusable, Reconfigurable
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-79896 (URN)
Merknad

On the day of the defence date the status of this article was "Manuscript" and the title was "A Communication Reliability Enhancement Framework for the ZigBee WirelessSensor Network".

Tilgjengelig fra: 2012-08-15 Laget: 2012-08-15 Sist oppdatert: 2018-07-19bibliografisk kontrollert
Zhang, J., Huynh, A., Ye, Q.-Z. & Gong, S. (2011). A Fully Wireless Monitoring and Control System for Protecting Cultural Heritage. In: Proceedings of 2011 20th IEEE International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises WETICE 2011. Paper presented at 20th IEEE International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), 27-29 June, Paris, France (pp. 250-255). IEEE
Åpne denne publikasjonen i ny fane eller vindu >>A Fully Wireless Monitoring and Control System for Protecting Cultural Heritage
2011 (engelsk)Inngår i: Proceedings of 2011 20th IEEE International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises WETICE 2011, IEEE , 2011, s. 250-255Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

This paper presents a component based wireless monitoring and control system. The system is introduced from both the system architecture and function point of view. The paper begins with the introduction of the component design and the communication interaction between them. The system is composed by three components, the wireless sensor network, the local server and the main server. Wireless sensor networks are deployed in different locations for remote monitoring and control purpose. The monitoring results and control commands are synchronized between the main server and wireless sensor networks via local servers. The test results of the battery life time calculation and remote monitoring field test results are presented in the end of the paper.

sted, utgiver, år, opplag, sider
IEEE, 2011
Serie
IEEE International Workshop on Enabling Technologies, ISSN 1524-4547
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-71523 (URN)10.1109/WETICE.2011.43 (DOI)978-1-4577-0134-4 (ISBN)
Konferanse
20th IEEE International Workshops on Enabling Technologies: Infrastructure for Collaborative Enterprises (WETICE), 27-29 June, Paris, France
Tilgjengelig fra: 2011-10-20 Laget: 2011-10-20 Sist oppdatert: 2013-12-16bibliografisk kontrollert
Zhang, J., Huynh, A., Ye, Q.-Z. & Gong, S. (2010). Design of the Remote Climate Control System for Cultural Buildings Utilizing ZigBee Technology. Sensors & Transducers Journal, 118(7), 13-27
Åpne denne publikasjonen i ny fane eller vindu >>Design of the Remote Climate Control System for Cultural Buildings Utilizing ZigBee Technology
2010 (engelsk)Inngår i: Sensors & Transducers Journal, ISSN 2306-8515, E-ISSN 1726-5479, Vol. 118, nr 7, s. 13-27Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

A wireless solution of remote climate control for cultural buildings is presented in this paper. The system allows users to use web service to control climate in different cultural buildings, like churches. The wireless sensor networks deployed in churches receive the control commands and manage the indoor climate. The whole system is modularly designed, which makes possible an easy service extension, system reconfiguration and modification. This paper includes the system overview and the software design of each part within the system.

Emneord
ZigBee, Wireless sensor network, Remote control, Modular system design
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-61293 (URN)
Prosjekter
CultureBee
Tilgjengelig fra: 2010-11-10 Laget: 2010-11-10 Sist oppdatert: 2017-12-12bibliografisk kontrollert
Zhang, J., Huynh, A., Ye, Q.-Z. & Gong, S. (2010). Reliability and Latency Enhancements in a ZigBee Remote Sensing System. In: : . Paper presented at The Fourth International Conference on Sensor Technologies and Applications (SENSORCOMM 2010), July 18 - 25, Venice/Mestre, Italy (pp. 196-202).
Åpne denne publikasjonen i ny fane eller vindu >>Reliability and Latency Enhancements in a ZigBee Remote Sensing System
2010 (engelsk)Konferansepaper, Publicerat paper (Annet vitenskapelig)
Abstract [en]

Methods to improve the reliability and optimize the system latency of our own-developed ZigBee remote sensing system are introduced in this paper. The concept of this system utilizes the ZigBee network to transmit sensor information and process them at both local and remote databases. The enhancement has been done in different parts in this system. In the ZigBee network part, the network topology is configured and controlled. The latency for message transmitting is also optimized. In the data processing part, the network status check function and data buffer function are introduced to improve the system reliability. Additionally, the system latency is measured to compare with the Ad-hoc On Demand Distance Vector algorithm used in the ZigBee standard.

Emneord
System reliability, system latency, ZigBee network topology configuration, data buffering
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-61294 (URN)10.1109/SENSORCOMM.2010.38 (DOI)978-1-4244-7538-4 (ISBN)
Konferanse
The Fourth International Conference on Sensor Technologies and Applications (SENSORCOMM 2010), July 18 - 25, Venice/Mestre, Italy
Prosjekter
CultureBee
Tilgjengelig fra: 2010-11-10 Laget: 2010-11-10 Sist oppdatert: 2014-09-25bibliografisk kontrollert
Zhang, J., Huynh, A., Ye, Q.-Z. & Gong, S. (2010). Remote Sensing System for Cultural Buildings Utilizing ZigBee Technology. Paper presented at 8th. International Conference on Computing, Communications and Control Technologies (CCCT 2010), April 6 - 9, Orlando, FL, USA.
Åpne denne publikasjonen i ny fane eller vindu >>Remote Sensing System for Cultural Buildings Utilizing ZigBee Technology
2010 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

A wireless remote sensing system using the ZigBee standard ispresented in this paper. This system is a wireless solution formonitoring purpose in cultural buildings in order to protectcultural heritage. The concept of this system utilizes ZigBeenetworks to carry and transmit data collected by sensors andstore them into both local and remote databases. Thus, users canmonitor the measured data locally or remotely. Especially, thepower consumption is optimized to extend the lifetime of thebattery-driven devices. Moreover, since the system has amodular architecture, it is easy to add extra services into thissystem.

Emneord
Modular system, power consumption, wireless sensor network, ZigBee
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-61295 (URN)
Konferanse
8th. International Conference on Computing, Communications and Control Technologies (CCCT 2010), April 6 - 9, Orlando, FL, USA
Prosjekter
CultureBee
Tilgjengelig fra: 2010-11-10 Laget: 2010-11-10 Sist oppdatert: 2013-12-16bibliografisk kontrollert
Huynh, A., Zhang, J., Ye, Q.-Z. & Gong, S. (2010). Wireless Remote Monitoring System for Cultural Heritage. Sensors & Transducers Journal, 118(7), 1-12
Åpne denne publikasjonen i ny fane eller vindu >>Wireless Remote Monitoring System for Cultural Heritage
2010 (engelsk)Inngår i: Sensors & Transducers Journal, ISSN 1726-5479, Vol. 118, nr 7, s. 1-12Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Existing systems to collect temperature and relative humidity data at cultural heritage buildings require technical knowledge by people who are working with it, which is very seldom that they do have. The systems available today also require manual downloading of the collected data from the sensor to a computer for central storage and for further analysis. In this paper a wireless remote sensor network based on the ZigBee technology together with a simplified data collection system is presented. The system does not require any knowledge by the building administrator after the network is deployed. The wireless sensor device will automatically join available network when the user wants to expand the network. The collected data will be automatically and periodically synchronized to a remote main server via an Internet connection. The data can be used for centralized monitoring and other purpose. The power consumption of the sensor module is also minimized and the battery lifetime is estimated up to 10 years.

Emneord
ZigBee, Remote monitoring, Low cost, Low power, Long battery lifetime
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-61216 (URN)
Prosjekter
CultureBee
Tilgjengelig fra: 2010-11-05 Laget: 2010-11-05 Sist oppdatert: 2010-11-16
Huynh, A., Zhang, J., Ye, Q.-Z. & Gong, S. (2010). ZigBee Radio with External Low-Noise Amplifier. Sensors & Transducers Journal, 114(3), 184-191
Åpne denne publikasjonen i ny fane eller vindu >>ZigBee Radio with External Low-Noise Amplifier
2010 (engelsk)Inngår i: Sensors & Transducers Journal, ISSN 1726-5479, Vol. 114, nr 3, s. 184-191Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

This article presents the performance study of a ZigBee module with an external low-noiseamplifier, measured in both outdoor and indoor environments. Our previous study has already shownthat the indoor campus environment such as walls and floors would reduce the radio link rangedrastically and the packet error rate increased. In this study, an external low-noise amplifier has beenadded to a ZigBee module to increase the receiver sensitivity. It is shown that with an external lownoiseamplifier the outdoor radio range can reach up to 403 m with a negligible packet error ratecompared to 144 m without the low-noise amplifier for point-to-point connection. Thus, by increasingthe receiver sensitivity the radio range can be increased without increasing of the radio power outputso that the power consumption can still be kept low to obtain long battery lifetime.

Emneord
ZigBee, Low-noise Amplifier, Increase Radio Link Range, Low Power, Long Battery Lifetime
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-61214 (URN)
Prosjekter
CultureBee
Tilgjengelig fra: 2010-11-05 Laget: 2010-11-05 Sist oppdatert: 2010-12-07
Organisasjoner