liu.seSearch for publications in DiVA
Endre søk
Link to record
Permanent link

Direct link
BETA
Wärner, Hugo
Publikasjoner (7 av 7) Visa alla publikasjoner
Calmunger, M., Wärner, H., Chai, G., Johansson, S. & Moverare, J. (2019). High Temperature Properties of Austenitic Stainless Steels for Future Power Plant Applications. In: : . Paper presented at EUROMAT19, Stockholm 2-5 September 2019.
Åpne denne publikasjonen i ny fane eller vindu >>High Temperature Properties of Austenitic Stainless Steels for Future Power Plant Applications
Vise andre…
2019 (engelsk)Konferansepaper, Poster (with or without abstract) (Fagfellevurdert)
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-162815 (URN)
Konferanse
EUROMAT19, Stockholm 2-5 September 2019
Tilgjengelig fra: 2019-12-19 Laget: 2019-12-19 Sist oppdatert: 2019-12-19
Wärner, H., Eriksson, R., Chai, G., Moverare, J., Johansson, S. & Calmunger, M. (2019). Influence of Ageing on Thermomechaical Fatigue of Austenitic Stainless Steels. In: Elsevier (Ed.), Structural Integrity Procedia: . Paper presented at 9th International Conference on Materials Structures and Micromechanics of Fracture, MSMF9, in Brno, Czech Republic, June 26-28, 2019. Elsevier
Åpne denne publikasjonen i ny fane eller vindu >>Influence of Ageing on Thermomechaical Fatigue of Austenitic Stainless Steels
Vise andre…
2019 (engelsk)Inngår i: Structural Integrity Procedia / [ed] Elsevier, Elsevier, 2019Konferansepaper, Oral presentation with published abstract (Fagfellevurdert)
sted, utgiver, år, opplag, sider
Elsevier, 2019
Emneord
Thermomechanical fatigue, Austenitic stainless steels, Ageing, Barrelling effect
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-161737 (URN)
Konferanse
9th International Conference on Materials Structures and Micromechanics of Fracture, MSMF9, in Brno, Czech Republic, June 26-28, 2019
Tilgjengelig fra: 2019-11-08 Laget: 2019-11-08 Sist oppdatert: 2019-11-12
Wärner, H., Calmunger, M., Chai, G. & Moverare, J. (2019). Microscopic Evaluation of Creep-Fatigue Interaction in Heat Resistant Austenic Alloys. In: : . Paper presented at EUROMAT19, Stockholm 2-5 September 2019.
Åpne denne publikasjonen i ny fane eller vindu >>Microscopic Evaluation of Creep-Fatigue Interaction in Heat Resistant Austenic Alloys
2019 (engelsk)Konferansepaper, Poster (with or without abstract) (Fagfellevurdert)
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-162817 (URN)
Konferanse
EUROMAT19, Stockholm 2-5 September 2019
Tilgjengelig fra: 2019-12-19 Laget: 2019-12-19 Sist oppdatert: 2019-12-19
Wärner, H., Calmunger, M., Chai, G., Johansson, S. & Moverare, J. (2019). Structural Integrity and Impact Toughness of Austenitic Stainless Steels. In: Proceedings of the 13th International Conference on the Mechanical Behaviour of Materials: . Paper presented at 13th International Conference on the Mechanical Behaviour of Materials (ICM13), 11-14 June 2019, Melbourne, Australia.
Åpne denne publikasjonen i ny fane eller vindu >>Structural Integrity and Impact Toughness of Austenitic Stainless Steels
Vise andre…
2019 (engelsk)Inngår i: Proceedings of the 13th International Conference on the Mechanical Behaviour of Materials, 2019Konferansepaper, Publicerat paper (Fagfellevurdert)
Emneord
Austenitic stainless steels, long-term ageing, impact toughness, fracture mechanisms
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-162679 (URN)978-1-922016-65-2 (ISBN)
Konferanse
13th International Conference on the Mechanical Behaviour of Materials (ICM13), 11-14 June 2019, Melbourne, Australia
Tilgjengelig fra: 2019-12-16 Laget: 2019-12-16 Sist oppdatert: 2019-12-16
Wärner, H., Calmunger, M., Chai, G., Johansson, S. & Moverare, J. (2019). Thermomechanical Fatigue Behaviour of Aged Heat Resistant Austenitic Alloys. International Journal of Fatigue (127), 509-521
Åpne denne publikasjonen i ny fane eller vindu >>Thermomechanical Fatigue Behaviour of Aged Heat Resistant Austenitic Alloys
Vise andre…
2019 (engelsk)Inngår i: International Journal of Fatigue, ISSN 0142-1123, E-ISSN 1879-3452, nr 127, s. 509-521Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The increasing demands for efficiency and flexibility result in more severe operating conditions for the materials used in critical components of biomass power plants. These operating conditions involve higher temperature ranges, more pronounced environmental effects and cyclic operations. Austenitic stainless steels have shown to possess promising high temperature properties which makes them suitable as candidates for critical components in biomass power plant. However, their behaviour under such conditions is not yet fully understood. This work investigates three commercial austenitic alloys: Esshete 1250, Sanicro 25 and Sanicro 31HT. The alloys were subjected to in-phase (IP) thermomechanical fatigue (TMF) testing under strain-control in the temperature range of 100–800 °C. Both virgin and pre-aged TMF specimens were tested in order to simulate service degradation resulting from long-term usage. The results show that the pre-aged specimens suffered shorter TMF-life compared to the virgin specimens. The scanning electron microscopy methods electron backscatter diffraction (EBSD) and energy dispersive spectroscopy (EDS) were used to analyse and discuss active failure and deformation mechanisms. The difference in TMF-life produced by the two testing conditions was attributed to an embrittling effect by precipitation, reduced creep properties and oxidation assisted cracking.

sted, utgiver, år, opplag, sider
Elsevier, 2019
Emneord
Thermomechanical fatigue, austenitic alloys, pre-ageing
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-159644 (URN)10.1016/j.ijfatigue.2019.06.012 (DOI)000482492600046 ()2-s2.0-85068255817 (Scopus ID)
Merknad

Funding agencies: AB Sandvik Materials Technology in Sweden; Swedish Energy Agency through the Research Consortium of Materials Technology for Thermal Energy Processes [KME-701]

Tilgjengelig fra: 2019-08-14 Laget: 2019-08-14 Sist oppdatert: 2019-10-16bibliografisk kontrollert
Wärner, H., Calmunger, M., Chai, G. & Moverare, J. (2018). Creep-Fatigue Interaction in Heat Resistant Austenitic Alloys. In: EDP Sciences (Ed.), MATEC Web of Conferences 165 , 05001 (2018): . Paper presented at Fatigue 2018 , 12th International Fatigue Congress, 27 May-1 June 2018, Poitiers, France. EDP Sciences, 165
Åpne denne publikasjonen i ny fane eller vindu >>Creep-Fatigue Interaction in Heat Resistant Austenitic Alloys
2018 (engelsk)Inngår i: MATEC Web of Conferences 165 , 05001 (2018) / [ed] EDP Sciences, EDP Sciences, 2018, Vol. 165Konferansepaper, Publicerat paper (Fagfellevurdert)
sted, utgiver, år, opplag, sider
EDP Sciences, 2018
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-148182 (URN)10.1051/matecconf/2018165505001 (DOI)
Konferanse
Fatigue 2018 , 12th International Fatigue Congress, 27 May-1 June 2018, Poitiers, France
Tilgjengelig fra: 2018-06-01 Laget: 2018-06-01 Sist oppdatert: 2018-11-27
Wärner, H. (2018). High-Temperature Fatigue Behaviour of Austenitic Stainless Steel: Influence of Ageing on Thermomechanical Fatigue and Creep-Fatigue Interaction. (Licentiate dissertation). Linköping: Linköping University Electronic Press
Åpne denne publikasjonen i ny fane eller vindu >>High-Temperature Fatigue Behaviour of Austenitic Stainless Steel: Influence of Ageing on Thermomechanical Fatigue and Creep-Fatigue Interaction
2018 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

The global energy consumption is increasing and together with global warming from greenhouse gas emission, create the need for more environmental friendly energy production processes. Higher efficiency of biomass power plants can be achieved by increasing temperature and pressure in the boiler section and this would increase the generation of electricity along with the reduction in emission of greenhouse gases e.g. CO2. The power generation must also be flexible to be able to follow the demands of the energy market, this results in a need for cyclic operating conditions with alternating output and multiple start-ups and shut-downs.

Because of the demands of flexibility, higher temperature and higher pressure in the boiler section of future biomass power plants, the demands on improved mechanical properties of the materials of these components are also increased. Properties like creep strength, thermomechanical fatigue resistance and high temperature corrosion resistance are critical for materials used in the next generation biomass power plants. Austenitic stainless steels are known to possess such good high temperature properties and are relatively cheap compared to the nickel-base alloys, which are already operating at high temperature cyclic conditions in other applications. The behaviour of austenitic stainless steels during these widened operating conditions are not yet fully understood.

The aim of this licentiate thesis is to increase the knowledge of the mechanical behaviour at high temperature cyclic conditions for austenitic stainless steels. This is done by the use of thermomechanical fatigue- and creepfatigue testing at elevated temperatures. For safety reasons, the effect of prolonged service degradation is investigated by pre-ageing before mechanical testing. Microscopy is used to investigate the microstructural development and resulting damage behaviour of the austenitic stainless steels after testing. The results show that creep-fatigue interaction damage, creep damage and oxidation assisted cracking are present at high temperature cyclic conditions. In addition, simulated service degradation resulted in a detrimental embrittling effect due to the deterioration by the microstructural evolution.

sted, utgiver, år, opplag, sider
Linköping: Linköping University Electronic Press, 2018. s. 32
Serie
Linköping Studies in Science and Technology. Licentiate Thesis, ISSN 0280-7971 ; 1824
HSV kategori
Identifikatorer
urn:nbn:se:liu:diva-153100 (URN)10.3384/lic.diva-153100 (DOI)9789176851746 (ISBN)
Presentation
2018-12-14, ACAS, A-huset, Campus Valla, Linköping, 10:15 (engelsk)
Opponent
Veileder
Forskningsfinansiär
Swedish Energy Agency, KME-701
Tilgjengelig fra: 2018-11-27 Laget: 2018-11-27 Sist oppdatert: 2019-10-12bibliografisk kontrollert
Organisasjoner