liu.seSök publikationer i DiVA
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Through thickness fracture toughness variations of AA7021 thick plate
Linköpings universitet, Institutionen för konstruktions- och produktionsteknik, Konstruktionsmaterial. Linköpings universitet, Tekniska högskolan.
Linköpings universitet, Institutionen för konstruktions- och produktionsteknik, Konstruktionsmaterial. Linköpings universitet, Tekniska högskolan.
(Engelska)Manuskript (preprint) (Övrigt vetenskapligt)
Abstract [en]

In this work, a variation of fracture toughness as a function of position and orientation in commercial thick plates of a high strength aluminium alloy has been investigated. Structural and mechanical property variations have been investigated in order to understand the result of the fracture toughness measurements. 100, 150 and 200 mm thick plates of the aluminium alloy AA7010 were studied. The material was averaged and stress relieved by stretching (100 and 150 mm) and cold compression (200 mm), T7451/52. The material studied is frequently used to produce load-carrying airframe components. The knowledge of fracture properties throughout the thick plates is of importance since components are machined from them. The understanding of the varying fracture properties is valuable for development of material and or processes for producing thick plate of high strength aluminium alloys. It is of course also important to know the limitations of the thick plate material and the best way to produce a certain component from a piece of the plate material. Investigated parameters influencing fracture properties are inclusions, recrystallisation, yield strength, chemical composition and quench rate.

Nationell ämneskategori
Teknik och teknologier
Identifikatorer
URN: urn:nbn:se:liu:diva-86816OAI: oai:DiVA.org:liu-86816DiVA, id: diva2:582811
Tillgänglig från: 2013-01-07 Skapad: 2013-01-07 Senast uppdaterad: 2013-01-07
Ingår i avhandling
1. Structure and properties of thick plate and near surface properties after high speed machining af AA7010
Öppna denna publikation i ny flik eller fönster >>Structure and properties of thick plate and near surface properties after high speed machining af AA7010
2003 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Using thick plates instead of forgings in the aircraft industry for integral construction of load carrying components is becoming more and more practice. The reasons are shorter lead-times from design of a modified or totally new component to introduction in an aircraft and smaller variations in properties for plate compared to forging. The concept of integral construction also reduces the assembly time. The complex shaped components are prepared by machining pieces of thick plate. The thicker the plate the larger components can be made in one piece. Machining components from blocks of material cut from thick plate means removal of a lot of material compared to machining of near final shape forgings. A change in machining concept to high speed machining leads to higher productivity and makes thin walled sections possible to manufacture due to decreased cutting forces.

Variation of through thickness structure and properties of 7010-T7451/2 as 100, 150 and 200 mm thick plates has been investigated. Through thickness crystallographic texture, degree of recrystallisation, distribution of inclusions, chemical composition and grain size has been mapped out. The observed structure is taken into account in order to explain variations of properties like yield strength; fracture toughness and fatigue crack growth resistance. Equipment used in the work of characterising the structure has been EBSP, SEM, X-ray diffraction and optical microscopy. Equipment used for evaluating mechanical properties is screw machines, servo hydraulic machines and hardness indentors.

The plates show a strong through thickness texture gradient that influence the yield strength. The yield strength is also dependent on chemical composition and quench rate. Recrystallisation did not show any significant influence on yield strength or fracture toughness. The grain morphology together with quench rate is of importance for the fracture toughness and the fatigue crack growth resistance.

Properties of down cut milled surfaces on thin sections using a conventional machining concept and the concept of high speed machining at various cutting speeds have been compared. The same has been done for facemilled surfaces using conventional tools and inserts at cutting speeds varying from 500 m/min up to 5000 m/min. The property of most interest is the high cycle fatigue strength. The influence of surface roughness, residual stresses and hardness on the fatigue strength has been investigated. In order to try to gain a little more information about the near surface properties x-ray diffraction studies at grazing angle incidence has been undertaken.

Ort, förlag, år, upplaga, sidor
Linköping: Linköpings universitet, 2003. s. 69
Serie
Linköping Studies in Science and Technology. Dissertations, ISSN 0345-7524 ; 822
Nationell ämneskategori
Teknik och teknologier
Identifikatorer
urn:nbn:se:liu:diva-30057 (URN)15517 (Lokalt ID)91-7373-652-X (ISBN)15517 (Arkivnummer)15517 (OAI)
Disputation
2003-09-12, Sal C3, Linköping Universitet, Linköping, 10:15 (Svenska)
Opponent
Tillgänglig från: 2009-10-09 Skapad: 2009-10-09 Senast uppdaterad: 2013-01-07

Open Access i DiVA

Fulltext saknas i DiVA

Personposter BETA

Andersson, Nils-EricJohansson, Sten

Sök vidare i DiVA

Av författaren/redaktören
Andersson, Nils-EricJohansson, Sten
Av organisationen
KonstruktionsmaterialTekniska högskolan
Teknik och teknologier

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 226 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf