liu.seSök publikationer i DiVA
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
A Co-Simulation Approach for Hydraulic Percussion Units
Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, Mekanik och hållfasthetslära. Linköpings universitet, Tekniska fakulteten.
2018 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

This Licentiate of Engineering thesis concerns modelling and simulation of hydraulic percussion units. These units are often found in equipment for breaking or drilling in rock and concrete, and are also often driven by oil hydraulics, in which complex fluid-structure couplings are essential for their operation.

Current methodologies used today when developing hydraulic percussion units are based on decoupled analyses, which are not correctly capturing the important coupled mechanisms. Hence, an efficient method for coupled simulations is of high importance, since these mechanisms are critical for the function of these units. Therefore, a co-simulation approach between a 1D system simulation model representing the fluid system and a structural 3D FE-model is proposed.

This approach is presented in detail, implemented for two well-known simulation tools and evaluated for a simple but relevant model. The Hopsan simulation tool was used for the fluid system and the FE-simulation software LS-DYNA was used for the structural mechanics simulation. The co-simulation interface was implemented using the Functional Mock-up Interface-standard.

The approach was further developed to also incorporate multiple components for coupled simulations. This was considered necessary when models for the real application are to be developed. The use of two components for co-simulation was successfully evaluated for two models, one using the simple rigid body representation, and a second where linear elastic representations of the structural material were implemented.

An experimental validation of the co-simulation approach applied to an existing hydraulic hammer was performed. Experiments on the hydraulic hammer were performed using an in-house test rig, and responses were registered at four different running conditions. The co-simulation model was developed using the same approach as before. The corresponding running conditions were simulated and the responses were successfully validated against the experiments. A parameter study was also performed involving two design parameters with the objective to evaluate the effects of a parameter change.

This thesis consists of two parts, where Part I gives an introduction to the application, the simulation method and the implementation, while Part II consists of three papers from this project.

Ort, förlag, år, upplaga, sidor
Linköping: Linköping University Electronic Press, 2018. , s. 37
Serie
Linköping Studies in Science and Technology. Licentiate Thesis, ISSN 0280-7971 ; 1818
Nationell ämneskategori
Farkostteknik Teknisk mekanik Annan elektroteknik och elektronik
Identifikatorer
URN: urn:nbn:se:liu:diva-151018DOI: 10.3384/diss.diva-151018ISBN: 9789176852224 (tryckt)OAI: oai:DiVA.org:liu-151018DiVA, id: diva2:1247112
Presentation
2018-09-28, C3, C-huset, Campus Valla, Linköping, 10:15 (Engelska)
Opponent
Handledare
Tillgänglig från: 2018-09-11 Skapad: 2018-09-11 Senast uppdaterad: 2019-10-12Bibliografiskt granskad
Delarbeten
1. A co-simulation method for system-level simulation of fluid-structure couplings in hydraulic percussion units
Öppna denna publikation i ny flik eller fönster >>A co-simulation method for system-level simulation of fluid-structure couplings in hydraulic percussion units
Visa övriga...
2017 (Engelska)Ingår i: Engineering with Computers, ISSN 0177-0667, E-ISSN 1435-5663, Vol. 33, nr 2, s. 317-333Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

This paper addresses a co-simulation method for fluid power driven machinery equipment, i.e. oil hydraulic machinery. In these types of machinery, the fluid-structure interaction affects the end-product performance to a large extent, hence an efficient co-simulation method is of high importance. The proposed method is based on a 1D system model representing the fluid components of the hydraulic machinery, within which structural 3D Finite Element (FE) models can be incorporated for detailed simulation of specific sub-models or complete structural assemblies. This means that the fluid system simulation will get a more accurate structural response, and that the structural simulation will get more correct fluid loads at every time step, compared to decoupled analysis. Global system parameters such as fluid flow, performance and efficiency can be evaluated from the 1D system model simulation results. From the 3D FE-models, it is possible to evaluate displacements, stresses and strains to be used in stress analysis, fatigue evaluation, acoustic analysis, etc. The method has been implemented using two well-known simulation tools for fluid power system simulations and FE-simulations, respectively, where the interface between the tools is realised by use of the Functional Mock-up Interface standard. A simple but relevant model is used to validate the method.

Ort, förlag, år, upplaga, sidor
SPRINGER, 2017
Nyckelord
Co-simulation; Fluid-structure coupling; System simulation; Functional mock-up interface; Fluid power machinery; Transmission line modelling
Nationell ämneskategori
Datorsystem
Identifikatorer
urn:nbn:se:liu:diva-136875 (URN)10.1007/s00366-016-0476-8 (DOI)000398468100012 ()
Anmärkning

Funding Agencies|Atlas Copco Construction Tools

Tillgänglig från: 2017-04-30 Skapad: 2017-04-30 Senast uppdaterad: 2018-09-11
2. System level co-simulation of a control valve and hydraulic cylinder circuit in a hydraulic percussion unit
Öppna denna publikation i ny flik eller fönster >>System level co-simulation of a control valve and hydraulic cylinder circuit in a hydraulic percussion unit
Visa övriga...
2017 (Engelska)Ingår i: Proceedings of 15:th Scandinavian International Conference on Fluid Power, June 7-9, 2017, Linköping, Sweden / [ed] Petter Krus, Liselott Ericson and Magnus Sethson, Linköping: Linköping University Electronic Press, 2017, Vol. 144, s. 225-235Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

In this study a previously developed co-simulation method that is based on a 1D system model representing the fluid components of a hydraulic machinery, within which structural 3D Finite Element (FE) models can be incorporated for detailed simulation of specific sub-models or complete structural assemblies, is further developed. The fluid system model consists of ordinary differential equation sub-models that are computationally very inexpensive, but still represents the fluid dynamics very well. The co-simulation method has been shown to work very well for a simple model representing a hydraulic driven machinery. A more complex model was set up in this work, in which two cylinders in the hydraulic circuit were evaluated. Such type of models, including both the main piston and control valves, are necessary as they represent the real application to a further extent than the simple model, of only one cylinder. Two models have been developed and evaluated, from the simple rigid body representation of the structural mechanics model, to the more complex model using linear elastic representation. The 3D FE-model facilitates evaluation of displacements, stresses, and strains on a local level of the model. The results can be utilised for fatigue assessment, wear analysis and for predictions of noise radiation.

Ort, förlag, år, upplaga, sidor
Linköping: Linköping University Electronic Press, 2017
Serie
Linköping Electronic Conference Proceedings, ISSN 1650-3686, E-ISSN 1650-3740 ; 144
Nyckelord
Co-simulation, Fluid-structure coupling, System simulation, Functional mockup interface, Fluid power machinery, Transmission line modelling
Nationell ämneskategori
Teknisk mekanik Farkostteknik Reglerteknik
Identifikatorer
urn:nbn:se:liu:diva-151015 (URN)10.3384/ecp17144225 (DOI)9789176853696 (ISBN)
Konferens
15th Scandinavian International Conference on Fluid Power, June 7-9, 2017, Linköping, Sweden
Tillgänglig från: 2018-09-11 Skapad: 2018-09-11 Senast uppdaterad: 2018-09-11Bibliografiskt granskad

Open Access i DiVA

A Co-Simulation Approach for Hydraulic Percussion Units(3676 kB)304 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 3676 kBChecksumma SHA-512
ed2033313e05143584e053dc7b80a39f3a423a4c81821861a0aab61f8988c0aab22d05017342b3fa9523bde70a271d0df21ec3e2a107d334c030d3e01e37ab99
Typ fulltextMimetyp application/pdf
omslag(2768 kB)23 nedladdningar
Filinformation
Filnamn COVER01.pdfFilstorlek 2768 kBChecksumma SHA-512
c068b05833dae46795c9bdbfac088cc021fdbf21b5d30e8ba10ba3871129f244fd187d7dab2484887b3168ecd9487b433a14d1f76787cfaa326f68c840d141dc
Typ coverMimetyp application/pdf
Beställ online >>

Övriga länkar

Förlagets fulltext

Personposter BETA

Andersson, Håkan

Sök vidare i DiVA

Av författaren/redaktören
Andersson, Håkan
Av organisationen
Mekanik och hållfasthetsläraTekniska fakulteten
FarkostteknikTeknisk mekanikAnnan elektroteknik och elektronik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 304 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

doi
isbn
urn-nbn

Altmetricpoäng

doi
isbn
urn-nbn
Totalt: 3006 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf