liu.seSearch for publications in DiVA
Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of temperature on mechanical response of austenitic materials
Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, Konstruktionsmaterial.
2011 (engelsk)Independent thesis Advanced level (degree of Master (Two Years)), 20 poäng / 30 hpOppgave
Abstract [en]

Global increase in energy consumption and global warming require more energy production but less CO2emission. Increase in efficiency of energy production is an effective way for this purpose. This can be reached by increasing boiler temperature and pressure in a biomass power plant. By increasing material temperature 50°C, the efficiency in biomass power plants can be increased significantly and the CO2emission can be greatly reduced. However, the materials used for future biomass power plants with higher temperature require improved properties. Austenitic stainless steels are used in most biomass power plants. In austenitic stainless steels a phenomenon called dynamic strain aging (DSA), can occur in the operating temperature range for biomass power plants. DSA is an effect of interaction between moving dislocations and solute atoms and occurs during deformation at certain temperatures. An investigation of DSA influences on ductility in austenitic stainless steels and nickel base alloys have been done. Tensile tests at room temperature up to 700°C and scanning electron microscope investigations have been used. Tensile tests revealed that ductility increases with increased temperature for some materials when for others the ductility decreases. This is, probably due to formation of twins. Increased stacking fault energy (SFE) gives increased amount of twins and high nickel content gives a higher SFE. Deformation mechanisms observed in the microstructure are glide bands (or deformations band), twins, dislocation cells and shear bands. Damage due to DSA can probably be related to intersection between glide bands or twins, see figure 6 a). Broken particles and voids are damage mechanisms observed in the microstructure.

sted, utgiver, år, opplag, sider
2011. , s. 51
Emneord [en]
Dynamic strain aging, biomass power plant, austenitic stainless steel, nickel base alloy, stacking fault energy, twins
HSV kategori
Identifikatorer
URN: urn:nbn:se:liu:diva-73748ISRN: LIU-IEI-TEK-A--11/01236--SEOAI: oai:DiVA.org:liu-73748DiVA, id: diva2:476691
Fag / kurs
Engineering Materials
Uppsök
Technology
Veileder
Examiner
Tilgjengelig fra: 2012-01-13 Laget: 2012-01-12 Sist oppdatert: 2012-01-13bibliografisk kontrollert

Open Access i DiVA

Effect of temperature on mechanical response of austenitic materials(19167 kB)5016 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 19167 kBChecksum SHA-512
3ccf08f3897f35e05f06380c49006dba290afe4a178649dfe2fee5feb80837b07db9691a5db6d98f567fd4f8e21a4a086f20efd764e482b303db572bd842a46f
Type fulltextMimetype application/pdf

Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 5016 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

urn-nbn

Altmetric

urn-nbn
Totalt: 1166 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf