Boundary-Scan in the ATCA standard
Independent thesis Basic level (professional degree), 20 points / 30 hpStudent thesis
Larger systems today, like telephone and optical switches, are usually based on a multiboard architecture where a set of printed-circuit boards are connected to a backplane board. These systems are also equipped with Boundary-Scan to enable testing, however, the backplane in a multi-board system has a limited wiring capability, which makes the additional backplane Boundary-Scan wiring highly costly. The problem is to access the Boundary-Scan enabled boards with the Boundary-Scan controller located at a central board. In this MSc. thesis project we propose an approach suitable for the Advanced Telecommunication Computing Architecture (ATCA) standard where we make use of the existing Intelligent Platform Management Bus (IPMB) and expands its protocol for application of Boundary-Scan tests. We have also defined a command set as well as a test data format for storing embedded test data on the boards to support the remote execution of Boundary-Scan tests. For validation of the proposed approach we have developed demonstrator.
Place, publisher, year, edition, pages
Institutionen för datavetenskap , 2005. , 72 p.
boundary-scan, ATCA, IPMI, test access, embedded test, backplane architecture
IdentifiersURN: urn:nbn:se:liu:diva-3282ISRN: LITH-IDA/DS-EX--05/008--SEOAI: oai:DiVA.org:liu-3282DiVA: diva2:20363