Bypass Modeling and Surge Control for turbocharged SI engines
Independent thesis Basic level (professional degree), 20 points / 30 hpStudent thesis
Since measurements in engine test cells are closely coupled with high costs it is of interest to use physically interpretable engine models instead of engine maps. Such engine models can also be used to do off-line tests of how new or altered components affects engine performance.
In the thesis an existing mean value engine model will be extended with a model of a compressor bypass valve. A controller for that valve will also be developed. The purpose with that controller is to save torque and boost pressure but at the same time avoid having the compressor entering surge during fast closing transients in the throttle position.
Both the extension and controller is successfully developed and implemented. The extension lowers the pressure after the compressor and increases the pressure before the compressor when the bypass valve is being opened and the controller shows better results in simulations than the controller used in the research lab. By using the proposed controller, as much as 5 percent higher torque can be achieved in simulations.
Finally there is a discussion on wastegate control alternatives and the use of TOMOC for optimization of wastegate control.
Place, publisher, year, edition, pages
Institutionen för systemteknik , 2005. , 76 p.
Mean Value Engine Modeling, Bypass valve, Surge control, Wastegate, TOMOC
IdentifiersURN: urn:nbn:se:liu:diva-3594ISRN: LiTH-ISY-EX--05/3712--SEOAI: oai:DiVA.org:liu-3594DiVA: diva2:20415
Wahlström, JohanAndersson, Per