Optimized Power Control for CDMA System using Channel Prediction
Independent thesis Basic level (degree of Bachelor), 10 points / 15 hpStudent thesis
In an optimal power control scheme for a Code Division Multiple Access (CDMA) system all mobile stations signals should arrive to the base station at equal power. If not, stronger singals may cause too much interference and block out weaker ones. Commonly used power control schemes utilizes the Signal to Interference Ratio (SIR) to design a Power Control Command (PCC) to adjust the transmit power of the mobile station. A significant problem within the conventional methods is the slow SIR recovery due to deep channel fades. Conventional methods base the PCC on the previous channel state when in fact, the channel state may have significantly changed when transmission occurs. These channel changes may cause the SIR to drop or rise drastically and lead to uncontrollable Multi Access Interference (MAI) resulting in power escalation and making the system unstable. In order to overcome power escalation and improve the recovery from deep fades a novel power control method has been developed. Based on Linear Quadratic Control and Kalman filtering for channel prediction this method designs the PCC based on the coming channel state instead of the current. This optimizes the PCC for the channel state where transmission occurs. Simulations show that this control scheme outperforms previous methods by making the impacts of the deep fades less severe on the SIR and also improves the overall SIR behaviour.
Place, publisher, year, edition, pages
Institutionen för teknik och naturvetenskap , 2005. , 65 p.
optimized power control cdma channel prediction
IdentifiersURN: urn:nbn:se:liu:diva-3697ISRN: LITH-ITN-EX--05/001--SEOAI: oai:DiVA.org:liu-3697DiVA: diva2:20430