ZnO nanoparticles or ZnO films: A comparison of the gas sensing capabilities
2009 (English)In: Sensors and actuators. B, Chemical, ISSN 0925-4005, Vol. 137, no 1, 94-102 p.Article in journal (Refereed) Published
Zinc oxide is an interesting material for bio and chemical sensors. it is a semiconducting metal oxide with potential as an integrated multisensing sensor platform, which simultaneously detects Parameters like change in field effect, mass and Surface resistivity. in this investigation we have used resistive sensor measurements regarding the oxygen gas sensitivity in order to characterize sensing layers based on electrochemically produced ZnO nanoparticles and PE-MOCVD grown ZnO films. Proper annealing procedures were developed in order to get stable sensing properties and the oxygen sensitivity towards operation temperature was investigated. The ZnO nanoparticles showed a considerably increased response to oxygen as compared to the films. Preliminary investigations were also performed regarding the selectivity to other gases present in car exhausts or flue gases.
Place, publisher, year, edition, pages
2009. Vol. 137, no 1, 94-102 p.
Zinc oxide, Nanoparticles, Multisensing, Gas sensor
IdentifiersURN: urn:nbn:se:liu:diva-17603DOI: 10.1016/j.snb.2008.10.072OAI: oai:DiVA.org:liu-17603DiVA: diva2:210840
Original Publication: Jens Eriksson, Volodymyr Khranovskyy, Fredrik Söderlind, Per-Olov Käll, Rositsa Yakimova and Anita Lloyd-Spets , ZnO nanoparticles or ZnO films: A comparison of the gas sensing capabilities, 2009, Sensors and actuators. B, Chemical, (137), 1, 94-102. http://dx.doi.org/10.1016/j.snb.2008.10.072 Copyright: Elsevier Science B.V., Amsterdam. http://www.elsevier.com/2009-04-062009-04-062015-05-28