An Active Recursive RF Filter in 0.35 μm BiCMOS
2005 (English)In: Journal of Analog Integrated Circuits and Signal Processing, ISSN 0925-1030 (print) 1573-1979 (online), Vol. 44, no 3, 213-218 p.Article in journal (Refereed) Published
An active recursive filter approach is proposed for the implementaion of an inductorless, tuneable RF filter in BiCMOS. A test circuit was designed and manufactured in a 0.35 μm SiGe BiCMOS technology. In simulations, the feasibility of this type of filter was demonstrated and reasonably good performance was obtained. The simulations show a center frequency tuning range from 6 to 9.4 GHz and a noise figure of 8.8 to 10.4 dB depending on center frequency. Gain and Q-value are tunable in a wide range. Simulated IIP-3 and 1-dB compression point is −26 and −34 dBm respectively, simulated at the center frequency 8.5 GHz and with 15 dB gain. Measurements on the fabricated device shows a center frequency tuning range from 6.6 to 10 GHz, i.e. slightly higher center frequencies were measured than the simulated.
Place, publisher, year, edition, pages
2005. Vol. 44, no 3, 213-218 p.
active filter, tuneable recursive filter for multicarrier systems, inductorless RF filter, tuneable gain and Q
Engineering and Technology
IdentifiersURN: urn:nbn:se:liu:diva-14085DOI: 10.1007/s10470-005-3002-2OAI: oai:DiVA.org:liu-14085DiVA: diva2:22597