liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Ion Current Dependence on Operating Condition and Ethanol Ratio
Linköping University, Department of Electrical Engineering.
2006 (English)Independent thesis Basic level (professional degree), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

This masters thesis investigates the possibility to estimate the ethanol content in the fuel using ion currents. Flexible fuel cars can be run on gasoline-ethanol blends with an ethanol content from0 to 85 percentage. It is important for the engine control system to have information about the fuel. In todays cars the measurements of the fuel blend are done by a sensor. If it is possible to do this with ion currents this can be used to detect if the sensor is broken, and then estimate the ethanol content until the sensor gets fixed. The benefit

of using ion currents is that the signal is measured directly from the spark plug and therefore no extra hardware is needed. To be able to see how the ethanol ratio affects the ion currents, the dependencies of the operating point have been investigated. This has been done by a literature review and by measurements in a Saab 9-3. Engine speed, load, ignition timing, lambda and spark plugs effects on the ion currents are especially studied. A black box model for the ion currents dependence on operating point is developed. This model describes the engine speed, load and ignition timing dependencies well, but it can not be used to estimate the ethanol ratio.

Place, publisher, year, edition, pages
Institutionen för systemteknik , 2006. , 67 p.
Keyword [en]
SI engine, black box modeling, engine speed, engine load, ignition timing
National Category
Engineering and Technology
URN: urn:nbn:se:liu:diva-8053ISRN: LiTH-ISY-EX-- 06/3898 -- SEOAI: diva2:22944
Subject / course
Vehicular Systems
2006-12-20, 09:15
Available from: 2007-01-16 Created: 2007-01-16 Last updated: 2012-04-24Bibliographically approved

Open Access in DiVA

fulltext(1270 kB)493 downloads
File information
File name FULLTEXT01.pdfFile size 1270 kBChecksum SHA-1
Type fulltextMimetype application/pdf

By organisation
Department of Electrical Engineering
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 493 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 322 hits
ReferencesLink to record
Permanent link

Direct link