liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Fault Isolation in Distributed Embedded Systems
Linköping University, Department of Electrical Engineering, Vehicular Systems. Linköping University, The Institute of Technology.
2007 (English)Doctoral thesis, monograph (Other academic)
Abstract [en]

To improve safety, reliability, and efficiency of automotive vehicles and other technical applications, embedded systems commonly use fault diagnosis consisting of fault detection and isolation. Since many systems are constructed as distributed embedded systems including multiple control units, it is necessary to perform global fault isolation using for example a central unit. However, the drawbacks with such a centralized method are the need of a powerful diagnostic unit and the sensitivity against disconnections of this unit.

Two alternative methods to centralized fault isolation are presented in this thesis. The first method performs global fault isolation by a istributed sequential computation. For a set of studied systems, themethod gives, compared to a centralizedmethod, amean reduction inmaximumprocessor load on any unitwith 40 and 70%for systems consisting of four and eight units respectively. The second method instead extends the result of the local fault isolation performed in each unit such that the results are globally correct. By only considering the components affecting each specific unit, the extended result in each agent is kept small. For a studied automotive vehicle, the second method gives, compared to a centralized method, a mean reduction in the sizes of the results and the maximum processor load on any unit with 85 and 90% respectively.

To perform fault diagnosis, diagnostic tests are commonly used. If the additional evaluation of tests can not improve the fault isolation of a component then the component is ready. Since the evaluation of a test comes with a cost in for example computational resources, it is valuable to minimize the number of tests that have to be evaluated before readiness is achieved for all components. A strategy is presented that decides in which order to evaluate tests such that readiness is achieved with as few evaluations of tests as possible.

Besides knowing how fault diagnosis is performed, it is also interesting to assess the effect that fault diagnosis has on for example safety. Since fault tree analysis often is used to evaluate safety, this thesis contributes with a systematic method that includes the effect of fault diagnosis in fault trees. The safety enhancement due to the use of fault diagnosis can thereby be analyzed and quantified.

Place, publisher, year, edition, pages
Institutionen för systemteknik , 2007. , 174 p.
Linköping Studies in Science and Technology. Dissertations, ISSN 0345-7524 ; 1074
Keyword [en]
Fault diagnosis, Fault isolation, Distributed diagnosis, Embedded systems, Fault tree analysis.
National Category
Engineering and Technology
URN: urn:nbn:se:liu:diva-8774ISBN: 978-91-85715-66-4OAI: diva2:23465
Public defence
2007-05-10, Visionen, Hus B, Campus Valla, Linköpings universitet, Linköping, 10:15 (English)
Available from: 2007-04-20 Created: 2007-04-20 Last updated: 2009-04-21

Open Access in DiVA

fulltext(1300 kB)814 downloads
File information
File name FULLTEXT01.pdfFile size 1300 kBChecksum MD5
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Biteus, Jonas
By organisation
Vehicular SystemsThe Institute of Technology
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 814 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 1517 hits
ReferencesLink to record
Permanent link

Direct link