Surge Modeling and Control of Automotive Turbochargers
Independent thesis Basic level (professional degree), 20 points / 30 hpStudent thesis
Mean Value Engine Modeling (MVEM) is used to make engine control development less expensive. With more and more cars equipped with turbocharged engines good turbo MVEM models are needed. A turbocharger consists of two major parts: turbine and compressor. Whereas the turbine is relatively durable, there exist phenomenons on the compressor that can destroy the turbocharger. One of these is surge.
Several compressor models are developed in this thesis. Methods to determine the compressor model parameters are proposed and discussed both for the stable operating range as well as for the surge region of a compressor map. For the stationary region methods to automatically parameterize the compressor model are developed. For the unstable surge region methods to get good agreement for desired surge properties are discussed. The parameter sensitivity of the different surge properties is also discussed. A validation of the compressor model shows that it gives good agreement to data, both for the stationary region as well as the surge region.
Different open loop and closed loop controllers as well as different performance variables are developed and discussed. A benchmark is developed, based on a measured vehicle acceleration, and the control approaches are compared using this benchmark. The best controller is found to be a open loop controller based on throttle and surge valve mass flow.
Place, publisher, year, edition, pages
Institutionen för systemteknik , 2007. , 82 p.
Compressor, Mean Value Engine Modeling, Surge control, Surge line, Surge valve
IdentifiersURN: urn:nbn:se:liu:diva-9616ISRN: LiTH-ISY-EX--07/3999--SEOAI: oai:DiVA.org:liu-9616DiVA: diva2:24039
2007-06-08, Systemet, Hus B, hus B:27, Valla, Linköping, 13:15
Eriksson, LarsAndersson, Per