liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Nanoscale structural characterization of epitaxial graphene grown on off-axis 4H-SiC (0001)
CNR-IMM, Catania, Italy.
CNR-IMM, Catania, Italy.
CNR-IMM, Catania, Italy.
Centrotherm Thermal Solut GmbH Co KG, Blaubeuren, Germany.
Show others and affiliations
2011 (English)In: NANOSCALE RESEARCH LETTERS, ISSN 1931-7573, Vol. 6, no 1Article in journal (Refereed) Published
Abstract [en]

In this work, we present a nanometer resolution structural characterization of epitaxial graphene (EG) layers grown on 4H-SiC (0001) 8 degrees off-axis, by annealing in inert gas ambient (Ar) in a wide temperature range (T-gr from 1600 to 2000 degrees C). For all the considered growth temperatures, few layers of graphene (FLG) conformally covering the 100 to 200-nm wide terraces of the SiC surface have been observed by high-resolution cross-sectional transmission electron microscopy (HR-XTEM). Tapping mode atomic force microscopy (t-AFM) showed the formation of wrinkles with approx. 1 to 2 nm height and 10 to 20 nm width in the FLG film, as a result of the release of the compressive strain, which builds up in FLG during the sample cooling due to the thermal expansion coefficients mismatch between graphene and SiC. While for EG grown on on-axis 4H-SiC an isotropic mesh-like network of wrinkles interconnected into nodes is commonly reported, in the present case of a vicinal SiC surface, wrinkles are preferentially oriented in the direction perpendicular to the step edges of the SiC terraces. For each Tgr, the number of graphene layers was determined on very small sample areas by HR-XTEM and, with high statistics and on several sample positions, by measuring the depth of selectively etched trenches in FLG by t-AFM. Both the density of wrinkles and the number of graphene layers are found to increase almost linearly as a function of the growth temperature in the considered temperature range.

Place, publisher, year, edition, pages
Springer Science Business Media , 2011. Vol. 6, no 1
National Category
Engineering and Technology
URN: urn:nbn:se:liu:diva-68785DOI: 10.1186/1556-276X-6-269ISI: 000290525700148OAI: diva2:420888
Available from: 2011-06-07 Created: 2011-06-07 Last updated: 2014-04-17

Open Access in DiVA

fulltext(1530 kB)35 downloads
File information
File name FULLTEXT01.pdfFile size 1530 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

Publisher's full text

Search in DiVA

By author/editor
Vecchio, CarmeloSonde, SushantBongiorno, CorradoRambach, MartinYakimova, RositsaRaineri, VitoGiannazzo, Filippo
By organisation
The Institute of TechnologySemiconductor Materials
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar
Total: 35 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 50 hits
ReferencesLink to record
Permanent link

Direct link