liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Numerical and experimental investigation of flow behavior in a confluent jet ventilation system for industrial premises
Linköping University, Department of Management and Engineering, Energy Systems. Linköping University, The Institute of Technology.
Linköping University, Department of Management and Engineering, Energy Systems. Linköping University, The Institute of Technology.
Linköping University, Department of Management and Engineering, Energy Systems. Linköping University, The Institute of Technology.
Delft University of Technology, Holland. (Department of Multi-Scale Physics, Faculty of Applied Sciences)
2012 (English)Conference paper (Other academic)
Abstract [en]

A conventional supply principle, such as rmxing or displacement ventilation, in industrial applications often results in low ventilation efficiency and high draught. A possible way to improve the ventilation efficiency in industrial premises is to implement a new type of supply system known as confluent jet ventilation. The confluent system can be described as a number of free jets issued in a plane, parallel to each other. In the proximity of the diffuser, the confluent jets behave as separate jets, but downstream the jets starts to merge with each other and eventually behave as a single jet. The main advantage of the confluent jet system is its ability to conserve momentum in an efficient way. The high level of momentum makes the ventilation system less sensitive to mechanical disturbances and buoyancy forces than displacement ventilation. This effect can be used to enhance the ventilation efficiency.

The purpose of this study is to investigate both numerically and experimentally the flow behavior of a confluent jet system in the region close to the diffuser.

In the present study, a diffusor consisting of 36 jets with an in-line anangement using equidistant spacing has been studied. The Reynolds number of the jet, based on the nozzle diameter, is Red= 3290. ARANS simulation using the Reynolds Stress Model (RSM) has been used to predict the mean velocity field and the tmbulence characteristics of the confluent jet configuration. The numerical simulations are compared with measurements using Particle Image Velocimetty (PIV), performed in a region extending out to a downsttream distance of 26 times the nozzle diameter. The flow behavior of the confluent jets showed good agreement with the experimental results.

Place, publisher, year, edition, pages
Keyword [en]
Confluent jet ventilation system, Near zone behavior, PIV measurements, CFD, Reynolds Stress Model
National Category
Energy Engineering
URN: urn:nbn:se:liu:diva-89789OAI: diva2:609686
The 10th International Conference on Industrial Ventilation, September 17-19, 2012, Paris, France
Ett nytt ventilationskoncept för industrilokaler
Swedish Research Council, 2008-31145-61023-37
Available from: 2013-03-13 Created: 2013-03-06 Last updated: 2015-04-15Bibliographically approved
In thesis
1. Experimental and Numerical Investigations of Confluent Round Jets
Open this publication in new window or tab >>Experimental and Numerical Investigations of Confluent Round Jets
2015 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Unconfined multiple interacting confluent round jets are interesting from a purely scientific point of view, as interaction between neighboring jets brings additional complexity to the flow field. Unconfined confluent round jets also exist in various engineering applications, such as ventilation supply devices, sewage disposal systems, combustion burners, chemical mixing or chimney stacks. Even so, little scientific attention has been paid to unconfined confluent round jets.

The present work uses both advanced measurement techniques and computational models to provide deeper understanding of the turbulent flow field development of unconfined confluent round jets. Both Laser Doppler Anemometry (LDA) and Particle Image Velocimetry (PIV) have been used to measure mean velocity and turbulence properties within two setups, consisting of a single row of 1×6 jets and a square array of 6×6 confluent jets.

Simulations using computational fluid dynamics (CFD) of the 6×6 setup were conducted using three different Reynolds Averaged Navier-Stokes (RANS) turbulence models: the standard k-ε, the RNG k-ε and the Reynolds Stress model (RSM). The results from the CFD simulations were compared with experimental data.

The employed RANS turbulence models were all capable of accurately predicting mean velocities and turbulent properties in the investigated confluent jet array. In general the RSM and k-ε std. models provided smaller deviations between numerical and experimental results than the RNG k-ε model. In terms of mean velocity the second-order closure model (RSM) was not found to be superior to the less complex standard k-ε model.

The validated CFD model was employed in a parametrical investigation, including five independent variables: inlet velocity, nozzle diameter, nozzle edge-to-edge spacing, nozzle height and the number of jets in the array. The parametrical investigations made use of statistical methods in the form of response surface methodology. The derived response surface models provided information on the principal influence and relative importance of the investigated parameters within the investigated design space.

The positions of the jets within the array strongly influence both mean velocity and turbulence. In all investigated setups the jets experience merging and combining. Square arrays also include considerable jet convergence, which was not present in the 1×6 jet array. Due to the jet convergence in square arrays the turbulent flow field, especially for jets far away from the array center, is affected by mean flow curvature.

Jets located along the sides of square jet arrays experience strong jet-to-jet interactions that result in considerable jet deformation, shorter potential core, higher turbulent kinetic energy and faster velocity decay compared to other jets. Jets located at the corners of the array do not interact as strongly with neighboring jets as do the jets along the sides. The locations of merging and combined points differ considerably between different jets and different jet configurations.

As the jets combine a zone with uniform stream-wise velocity and low turbulence intensity forms in the center of square jet arrays. This zone has been called Confluent Core Zone (CCZ) due to its similarities with the potential core zone of a single jet. Within the CCZ the appropriate scaling length changes from nozzle diameter to the effective source diameter.

The parametrical investigation showed that nozzle diameter and edge-to-edge nozzle spacing were the most important of the investigated parameters, reflecting a strong dependence on dimensionless jet spacing, S/d0. Higher S/d0 delays both merging and combining of the jets and leads to a CCZ with lower velocity and longer downstream extension. Increasing the array size leads to a reduced combined point distance, a stronger inwards displacement of jets in the outer part of the array, and reduced entrainment near the nozzles. A higher inlet velocity was found to increase the jet convergence in the investigated square confluent jet arrays. Nozzle height generally has minor impact on the investigated response variables.

Place, publisher, year, edition, pages
Linköping: Linköping University Electronic Press, 2015. 110 p.
Linköping Studies in Science and Technology. Dissertations, ISSN 0345-7524 ; 1653
Confluent jets, Multiple jet array, Jet interactions, Confluent Core Zone (CCZ), Particle Image Velocimetry (PIV), Laser Doppler Velocimetry (LDA), Computational Fluid Dynamics (CFD), Response Surface Methodology
National Category
Energy Systems Fluid Mechanics and Acoustics
urn:nbn:se:liu:diva-117066 (URN)10.3384/diss.diva-117066 (DOI)978-91-7519-086-0 (print) (ISBN)
Public defence
2015-05-11, ACAS, hus A, Campus Valla, Linköping, 10:15 (Swedish)
Available from: 2015-04-15 Created: 2015-04-15 Last updated: 2015-04-15Bibliographically approved

Open Access in DiVA

fulltext(768 kB)383 downloads
File information
File name FULLTEXT01.pdfFile size 768 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Svensson, KlasGhahremanian, ShahriarMoshfegh, Bahram
By organisation
Energy SystemsThe Institute of Technology
Energy Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 383 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 200 hits
ReferencesLink to record
Permanent link

Direct link