liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Modeling and Sensor Fusion of a Remotely Operated Underwater Vehicle
Linköping University, Department of Electrical Engineering, Automatic Control. Linköping University, The Institute of Technology.
Saab Group, Linköping, Sweden.
Linköping University, Department of Electrical Engineering, Automatic Control. Linköping University, The Institute of Technology.
2012 (English)In: Proceedings of the 15th International Conference on Information Fusion (FUSION), 2012, IEEE , 2012, 947-954 p.Conference paper (Refereed)
Abstract [en]

We compare dead-reckoning of underwater vehicles based on inertial sensors and kinematic models on one hand, and control inputs and hydrodynamic model on the other hand. Both can be used in an inertial navigation system to provide relative motion and absolute orientation of the vehicle. The combination of them is particularly useful for robust navigation in the case of missing data from the crucial doppler log speedometer. As a concrete result, we demonstrate that the performance critical doppler log can be replaced with longitudinal dynamics in the case of missing data, based on field test data of a remotely operated vehicle.

Place, publisher, year, edition, pages
IEEE , 2012. 947-954 p.
Keyword [en]
autonomous underwater vehicles, hydrodynamics, inertial navigation, kinematics, sensor fusion
National Category
Control Engineering
URN: urn:nbn:se:liu:diva-97490ISBN: 978-0-9824438-4-2 (online)ISBN: 978-1-4673-0417-7 (print)OAI: diva2:647988
15th International Conference on Information Fusion (FUSION), 9-12 July 2012, Singapore
Available from: 2013-09-13 Created: 2013-09-13 Last updated: 2014-09-17Bibliographically approved
In thesis
1. Inertial Navigation and Mapping for Autonomous Vehicles
Open this publication in new window or tab >>Inertial Navigation and Mapping for Autonomous Vehicles
2014 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Navigation and mapping in unknown environments is an important building block for increased autonomy of unmanned vehicles, since external positioning systems can be susceptible to interference or simply being inaccessible. Navigation and mapping require signal processing of vehicle sensor data to estimate motion relative to the surrounding environment and to simultaneously estimate various properties of the surrounding environment. Physical models of sensors, vehicle motion and external influences are used in conjunction with statistically motivated methods to solve these problems. This thesis mainly addresses three navigation and mapping problems which are described below.

We study how a vessel with known magnetic signature and a sensor network with magnetometers can be used to determine the sensor positions and simultaneously determine the vessel's route in an extended Kalman filter (EKF). This is a so-called simultaneous localisation and mapping (SLAM) problem with a reversed measurement relationship.

Previously determined hydrodynamic models for a remotely operated vehicle (ROV) are used together with the vessel's sensors to improve the navigation performance using an EKF. Data from sea trials is used to evaluate the system and the results show that especially the linear velocity relative to the water can be accurately determined.

The third problem addressed is SLAM with inertial sensors, accelerometers and gyroscopes, and an optical camera contained in a single sensor unit. This problem spans over three publications.

We study how a SLAM estimate, consisting of a point cloud map, the sensor unit's three dimensional trajectory and speed as well as its orientation, can be improved by solving a nonlinear least-squares (NLS) problem. NLS minimisation of the predicted motion error and the predicted point cloud coordinates given all camera measurements is initialised using EKF-SLAM.

We show how NLS-SLAM can be initialised as a sequence of almost uncoupled problems with simple and often linear solutions. It also scales much better to larger data sets than EKF-SLAM. The results obtained using NLS-SLAM are significantly better using the proposed initialisation method than if started from arbitrary points. A SLAM formulation using the expectation maximisation (EM) algorithm is proposed. EM splits the original problem into two simpler problems and solves them iteratively. Here the platform motion is one problem and the landmark map is the other. The first problem is solved using an extended Rauch-Tung-Striebel smoother while the second problem is solved with a quasi-Newton method. The results using EM-SLAM are better than NLS-SLAM both in terms of accuracy and complexity.

Place, publisher, year, edition, pages
Linköping: Linköping University Electronic Press, 2014. 77 p.
Linköping Studies in Science and Technology. Dissertations, ISSN 0345-7524 ; 1623
SLAM, Inertial Navigation, Filtering, Smoothing, Cameras, Optimisation, Autonomous
National Category
Control Engineering
urn:nbn:se:liu:diva-110373 (URN)10.3384/diss.diva-110373 (DOI)978-91-7519-233-8 (print) (ISBN)
Public defence
2014-10-17, Visionen, Hus B, Campus Valla, Linköpings universitet, Linköping, 10:15 (English)
Available from: 2014-09-17 Created: 2014-09-09 Last updated: 2014-09-17Bibliographically approved

Open Access in DiVA

fulltext(1886 kB)1013 downloads
File information
File name FULLTEXT01.pdfFile size 1886 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Other links

IEEE link

Search in DiVA

By author/editor
Skoglund, Martin A.Fredrik, Gustafsson
By organisation
Automatic ControlThe Institute of Technology
Control Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 1013 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 278 hits
ReferencesLink to record
Permanent link

Direct link