liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Investigation of a swing check valve using CFD
Linköping University, Department of Management and Engineering, Applied Thermodynamics and Fluid Mechanics. Linköping University, The Institute of Technology.
2014 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

This master’s thesis is made to increase the understanding of the dynamic characteristics of a typical large swing check valve used in a system that transports pressurized water to a reactor tank.3D FSI-simulations are performed for a number of transients in order to study the dynamic characteristics their dependence of the deceleration rate. The purpose is to find information about the dynamics that could be used in a future improvement of a 1D-model.Steady state simulations are performed for angles in the whole spectrum. Seven transient FSI-simulations with different constantly decelerating flows from 630 kg/s2 (6.7 m/s2) to 40 320 kg/s2 (430 m/s2) have been performed. The pressure on the disc caused by the hydraulic torque is integrated and the corresponding torque contribution, together with the weight torque, is used in the second law of motion to calculate the movement of the disc throughout the transients.Steady state simulations yield the pressure drop over the valve, which could be compared with field measurements in order to validate the CFD-simulations. Comparison of the pressure distribution on the disc for the steady state and transient simulations shows the importance of taking the disc angular velocity into account when modelling in 1D. Correlations between the angle, angular velocity, torque and mass flow are obtained from the transient FSI-simulations. Torque coefficients according to (Li & Liou, Vol. 125) are also brought out from the simulated transients, but in order to create a model in line with this approach further simulations have to be performed. A prediction of the pressure rise that occurs when a swing check valve closes in backward flow according to the Joukowsky equation is brought out and gives an idea of the loadings that the system has to be able to handle.

Place, publisher, year, edition, pages
2014. , 71 p.
Keyword [en]
swing check valve, check valve, CFD, FSI, Emil Boqvist
Keyword [sv]
backventil, flödesberäkningar, Emil, Boqvist
National Category
Applied Mechanics
URN: urn:nbn:se:liu:diva-110751ISRN: LIU-IEI-TEK-A--14/02013--SEOAI: diva2:748620
External cooperation
FS Dynamics AB
Subject / course
Applied Thermodynamics and Fluid Mechanics
2014-06-11, 12:40 (Swedish)
Available from: 2014-09-22 Created: 2014-09-20 Last updated: 2014-09-22Bibliographically approved

Open Access in DiVA

Master Thesis Emi Boqvist(5175 kB)1597 downloads
File information
File name FULLTEXT01.pdfFile size 5175 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Boqvist, Emil
By organisation
Applied Thermodynamics and Fluid MechanicsThe Institute of Technology
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar
Total: 1597 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 376 hits
ReferencesLink to record
Permanent link

Direct link