liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Modeling and Control of a Parallel HEV Powertrain with Focus on the Clutch
Linköping University, Department of Electrical Engineering, Vehicular Systems. Linköping University, Faculty of Science & Engineering. Linkoping University.
2015 (English)Independent thesis Advanced level (degree of Master (Two Years)), 80 credits / 120 HE creditsStudent thesis
Abstract [en]

Nowadays, the increasing amount of greenhouse gases and diminishing of the existing petroleum minerals for future generations, has led the automotive companies to think of producing vehicles with less emissions and fuel consumption. For this purpose, Hybrid Electric Vehicles (HEVs) have emerged in the recent decades. HEVs with different configurations have been introduced by engineers.The simulation platform aim for a parallel HEV, where the intention is to reduce the emissions and fuel consumption. The simulation platform includes an Electric Motor (EM) in addition to an Internal Combustion Engine (ICE). A new transmission system is modeled which is compatible with parallel configuration for the HEV, where the inertial effects of the gearbox, clutch and driveline is formulated. The transmission system includes a gearbox which is equipped with synchronizers for smooth change of gears.

The HEV is controlled by a rule based controller together with an optimization algorithm as power management strategy in order to have optimal fuel consumption. Using the rule based controller, the HEV is planned to be launched by EM in order to have a downsized clutch and ICE. The clutch modeling is the main focus of this study, where the slipping mechanism is considered in the simulation. In the driveline model, the flexibility effects of the propeller shaft and drive shaft is simulated, so that the model can capture the torsional vibrations of the driveline. The objective of modeling such a system is to reduce emissions and fuel consumption with the same performance of the conventional vehicle. To achieve this goal first a conventional vehicle is modeled and subsequently, a hybrid vehicle is modeled and finally the characteristics of the two simulated models are studied and compared with each other.

Using the simulation platform, the state of charge (SOC) of the battery, oscillations of propeller shaft and drive shaft, clutch actuations and couplings, energy dissipated by the clutch, torques provided by EM and ICE, fuel consumptions, emissions and calculation time are calculated and investigated. The hybridization results in a reduction in fuel consumption and emissions, moreover, the energy dissipated by the clutch and clutch couplings are decreased.

Place, publisher, year, edition, pages
2015. , 60 p.
Keyword [en]
parallel hybrid electric vehicles, clutch modeling, driveline modeling, torsional vibrations, slipping clutch, energy management, optimization
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
URN: urn:nbn:se:liu:diva-119396ISRN: LiTH-ISY-EX--15/4869--SEOAI: diva2:822041
External cooperation
Kongsberg Automotive, Vicura Engineering Academy
Subject / course
Vehicular Systems
2015-06-09, Algoritmen, B bldg, Campus Valla, Linkoping University, Linköping, 15:15 (English)
Available from: 2015-06-16 Created: 2015-06-16 Last updated: 2015-06-16Bibliographically approved

Open Access in DiVA

fulltext(12666 kB)112 downloads
File information
File name FULLTEXT01.pdfFile size 12666 kBChecksum SHA-512
Type fulltextMimetype application/pdf

By organisation
Vehicular SystemsFaculty of Science & Engineering
Electrical Engineering, Electronic Engineering, Information Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 112 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 575 hits
ReferencesLink to record
Permanent link

Direct link