liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
Methods to Predict Structural Response due to Random Sound Pressure Fields
Linköping University, Department of Management and Engineering, Solid Mechanics. Linköping University, Faculty of Science & Engineering.
2015 (English)Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE creditsStudent thesis
Abstract [en]

To predict structural responses due to random sound pressure fields are of great interest within many fields of aircraft development, particularly within acoustic fatigue problems and definition of vibration requirements.  Today there exist some methods to quantify sound pressure fields affecting the air-fighters. Some of them are considered to be expensive, time consuming or with high computational cost. Examples of this would be to measure a real flight, produce data from wind tunnels, use Computational Fluid Dynamics (CFD) or obtain data from an engineering database. Once the sound pressure levels are known they can be applied as loads to structural models and this is the area studied in this work. To study these problems a new working tool is made using MATLAB. The tool’s main purpose is to give an opportunity to study structural responses caused by random sound pressure fields with different correlation methods.  Because of the complexity of both the sound pressure and different structures of the aircraft a few limitations are considered. The plate is used since this makes is easy to produce different mode shape functions. The mode shape function is an important part in this work as it can be used to create all possible frequency response functions in a structure. Then, to determine a structure response, different methods to produce pressure fields are used. The methods are called correlation-models and five different models are considered: uncorrelated, fully correlated and moving correlated load (MCL) and two empirical models due to the similarity to real sound pressure fields called Turbulent Boundary Layer (TBL) and a diffuse excitation model. To prove the accuracy of the created working tool, an independent FE-solver is used called Abaqus. Abaqus  is  used  to  validate  the  mode  shape-  and  the  frequency  response-fucntions.  Another advantage  with  Abaqus  is  that  the  solver  already  includes  three  of  the  correlation  models  which therefore simplify the verification of the new tool. Finally,  a  simulation  study  is  carried  out  in  order  to  validate  the  MATLAB  functions  and  test  the sensitivity  to  different  correlation  models.  In  order  to  do  this,  the  sound  pressure  field  is  to  be reasonable  approximated  and  therefore  data  from  the  database  ESDU  (acronym  of  Engineering Sciences Data Unit) is used that predicts sound pressure fields for different flight envelopes. In the simulation study all correlation models are compared to TBL due to its sound pressure and here it can be seen that fully correlated loads fails to predict response due to certain modes. On the other hand, the MCL model increases this accuracy for low Mach numbers and even more for high Mach numbers  due  to  its  velocity  dependence.  The  diffuse  model,  which  is  supposed  to  imitate  a  real pressure chamber load, is often believed to be conservative but in this study it can be seen that this is not always the case.

Place, publisher, year, edition, pages
2015. , 33 p.
National Category
Applied Mechanics
URN: urn:nbn:se:liu:diva-121632ISRN: LIU-IEI-TEK-A--15/02367--SEOAI: diva2:857430
External cooperation
Saab AB
Subject / course
Engineering Mechanics
Random Vibration, Power Spectral Density, Cross Correlation, Turbulent Boundary Layer, Random Response
Available from: 2015-10-14 Created: 2015-09-29 Last updated: 2015-10-14Bibliographically approved

Open Access in DiVA

Methods to Predict Structural Response due to Random Sound Pressure Fields(3474 kB)309 downloads
File information
File name FULLTEXT01.pdfFile size 3474 kBChecksum SHA-512
Type fulltextMimetype application/pdf

Search in DiVA

By author/editor
Gunnarsson, Pontus
By organisation
Solid MechanicsFaculty of Science & Engineering
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar
Total: 311 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 210 hits
ReferencesLink to record
Permanent link

Direct link