liu.seSearch for publications in DiVA
Change search
ReferencesLink to record
Permanent link

Direct link
On Electrohydraulic Pressure Control for Power Steering Applications: Active Steering for Road Vehicles
Linköping University, Department of Management and Engineering, Fluid and Mechatronic Systems. Linköping University, Faculty of Science & Engineering.
2016 (English)Doctoral thesis, monograph (Other academic)
Abstract [en]

This thesis deals with the Electrohydraulic Power Steering system for road vehicles, using electronic pressure control valves. With an ever increasing demand for safer vehicles and fewer traffic accidents, steering-related active safety functions are becoming more common in modern vehicles. Future road vehicles will also evolve towards autonomous vehicles, with several safety, environmental and financial benefits. A key component in realising such solutions is active steering.

The power steering system was initially developed to ease the driver's workload by assisting in turning the wheels. This is traditionally done through a passive open-centre hydraulic system and heavy trucks must still rely on fluid power, due to the heavy work forces. Since the purpose of the original system is to control the assistive pressure, one way would be to use proportional pressure control valves. Since these are electronically controlled, active steering is possible and with closed-centre, energy efficiency can be significantly improved on.

In this work, such a system is analysed in detail with the purpose of investigating the possible use of the system for Boost curve control and position control for autonomous driving. Commercially available valves are investigated since they provide an attractive solution. A model-based approach is adopted, where simulation of the system is an important tool. Another important tool is hardware-in-the-loop simulation. A test rig of an electrohydraulic power steering system, is developed.

This work has shown how proportional pressure control valves can be used for Boost curve control and position control and what implications this has on a system level. As it turns out, the valves add a great deal of time lag and with the high gain from the Boost curve, this creates a control challenge. The problem can be handled by tuning the Boost gain, pressure response and damping and has been effectively shown through simulation and experiments. For position control, there is greater freedom to design the controller to fit the system. The pressure response can be made fast enough for this case and the time lag is much less critical.

Place, publisher, year, edition, pages
Linköping: Linköping University Electronic Press, 2016. , 187 p.
Linköping Studies in Science and Technology. Dissertations, ISSN 0345-7524 ; 1739
National Category
Vehicle Engineering
URN: urn:nbn:se:liu:diva-124574DOI: 10.3384/diss.diva-124574ISBN: 978-91-7685-838-7 (Print)OAI: diva2:900398
Public defence
2016-02-26, A35, A-huset, Campus Valla, Linköping, 10:15 (English)
Available from: 2016-02-04 Created: 2016-02-04 Last updated: 2016-02-10Bibliographically approved

Open Access in DiVA

fulltext(22125 kB)209 downloads
File information
File name FULLTEXT01.pdfFile size 22125 kBChecksum SHA-512
Type fulltextMimetype application/pdf
omslag(350 kB)13 downloads
File information
File name COVER01.pdfFile size 350 kBChecksum SHA-512
Type coverMimetype application/pdf

Other links

Publisher's full text

Search in DiVA

By author/editor
Dell'Amico, Alessandro
By organisation
Fluid and Mechatronic SystemsFaculty of Science & Engineering
Vehicle Engineering

Search outside of DiVA

GoogleGoogle Scholar
Total: 209 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Altmetric score

Total: 1258 hits
ReferencesLink to record
Permanent link

Direct link