liu.seSearch for publications in DiVA
Change search
Refine search result
1 - 20 of 20
CiteExportLink to result list
Permanent link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Rows per page
  • 5
  • 10
  • 20
  • 50
  • 100
  • 250
Sort
  • Standard (Relevance)
  • Author A-Ö
  • Author Ö-A
  • Title A-Ö
  • Title Ö-A
  • Publication type A-Ö
  • Publication type Ö-A
  • Issued (Oldest first)
  • Issued (Newest first)
  • Created (Oldest first)
  • Created (Newest first)
  • Last updated (Oldest first)
  • Last updated (Newest first)
  • Disputation date (earliest first)
  • Disputation date (latest first)
  • Standard (Relevance)
  • Author A-Ö
  • Author Ö-A
  • Title A-Ö
  • Title Ö-A
  • Publication type A-Ö
  • Publication type Ö-A
  • Issued (Oldest first)
  • Issued (Newest first)
  • Created (Oldest first)
  • Created (Newest first)
  • Last updated (Oldest first)
  • Last updated (Newest first)
  • Disputation date (earliest first)
  • Disputation date (latest first)
Select
The maximal number of hits you can export is 250. When you want to export more records please use the Create feeds function.
  • 1.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Surface Integrity and Fatigue Performance of Nickel-based Superalloys2017Doctoral thesis, comprehensive summary (Other academic)
    Abstract [en]

    Due to global warming, the demand for more efficient gas turbines has increased. A way to achieve this, is by increasing the operating temperature of the gas turbine. Therefore, nickel-based superalloys have been developed to withstand these extreme temperatures and loads, especially in the hot sections. Today, the way of operating land-based gas turbines is changing. Instead of running for long periods of time, the operation is becoming more flexible, with ever-increasing cyclic loads and number of start and stop cycles. To handle the increased stress and cycles, component resistance to fatigue failures need to be improved.

    Surface integrity is critical to fatigue performance, since fatigue cracks normally initiate at a surface. Machining changes the surface integrity which can result in worse fatigue resistance. The work presented in this Ph.D. thesis was conducted in collaboration with Siemens Industrial Turbomachinery AB in Finspång, Sweden. Surface integrity changes which are induced during machining and their effects on fatigue performance have been studied on the alloy Inconel 718. Inconel 718 is a widely-used nickel-based superalloy for high temperature applications in modern gas turbines.

    Broaching, milling, and wire electrical discharge machining, related to component manufacturing in turbo machinery industries, were included in this study. Machining induced surface defects provide preferential sites for fatigue crack initiation which influence the fatigue performance of the alloy. If compressive residual stresses are induced during machining, they benefit the fatigue life by retarding fatigue crack initiation away from surface regions. Shot peening was performed on machined Inconel 718, by which high compressive residual stresses are deliberately induced. It results in enhanced fatigue performance.

    The high temperatures in gas turbines generally deteriorate the surface integrity. Recrystallization often occurs in the highly deformed surface layer. Microstructural degradation, in the form of α-Cr precipitates, have also been frequently observed in the deformed surface and sub-surface microstructure. Oxidation at elevated temperatures degrades the surface integrity and thereby also the fatigue performance. Fatigue cracks are preferably initiated at oxidized surface carbides, if thermal exposure has been made prior to the test. It is even worse when high temperatures relax the beneficial surface compression induced by shot-peening and thereby lowering the fatigue resistance.

    Machinability of a newly developed nickel-based superalloy, AD 730TM, and the surface integrity induced during turning have also been studied in this thesis project. AD 730TM is a candidate for turbine disc applications with an operating temperature above 650 °C. At such high temperatures, Inconel 718 is no longer stable and its mechanical properties start to degrade.

    To summarize, the results from this thesis work show the importance of understanding surface integrity effects for fatigue applications, especially in harsh environments. Moreover, the knowledge gained through this work could be used for surface enhancement of turbine components which are subjected to a high risk of fatigue failure. These will contribute to more efficient and flexible power generation by gas turbines.

    List of papers
    1. Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
    Open this publication in new window or tab >>Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
    Show others...
    2016 (English)In: Metallurgical and Materials Transactions. A, ISSN 1073-5623, E-ISSN 1543-1940, Vol. 47A, no 7, p. 3664-3676Article in journal (Refereed) Published
    Abstract [en]

    The current study focused on the surface integrity issues associated with broaching of Inconel 718 and the structural stability of the broached specimen at high temperatures, mainly involving the microstructural changes and residual stress relaxation. The broaching operation was performed using similar cutting conditions as that used in turbo machinery industries for machining fir-tree root fixings on turbine disks. Thermal exposure was conducted at 723 K, 823 K, and 923 K (450 A degrees C, 550 A degrees C, and 650 A degrees C) for 30, 300, and 3000 hours, respectively. Surface cavities and debris dragging, sub-surface cracks, high intensity of plastic deformation, as well as the generation of tensile residual stresses were identified to be the main issues in surface integrity for the broached Inconel 718. When a subsequent heating was applied, surface recrystallization and alpha-Cr precipitation occurred beneath the broached surface depending on the applied temperature and exposure time. The plastic deformation induced by the broaching is responsible for these microstructural changes. The surface tension was completely relaxed in a short time at the temperature where surface recrystallization occurred. The tensile layer on the sub-surface, however, exhibited a much higher resistance to the stress relief annealing. Oxidation is inevitable at high temperatures. The study found that the surface recrystallization could promote the local Cr diffusion on the broached surface.

    Place, publisher, year, edition, pages
    Springer, 2016
    Keywords
    Structural integrity, Broaching, Inconel 718, Plastic deformation, Residual stresses, Thermal exposure, Superalloy
    National Category
    Materials Engineering Other Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-111056 (URN)10.1007/s11661-016-3515-6 (DOI)000377434700041 ()
    Funder
    Linköpings universitet, 2009-00971
    Note

    The original title of this article when published in manuscript form was Structural integrity of broached Inconel 718 subjected to thermal exposure.

    Available from: 2014-10-06 Created: 2014-10-06 Last updated: 2018-02-27Bibliographically approved
    2. On the Conjoint Influence of Broaching and Heat Treatment on Bending Fatigue Behavior of Inconel 718
    Open this publication in new window or tab >>On the Conjoint Influence of Broaching and Heat Treatment on Bending Fatigue Behavior of Inconel 718
    Show others...
    2016 (English)In: Materials Science & Engineering: A, ISSN 0921-5093, E-ISSN 1873-4936, Vol. 671, p. 158-169Article in journal (Refereed) Published
    Abstract [en]

    In this study, the conjoint effect of a broaching operation, similar to that used for machining fir-tree slots on turbine discs, and subsequent heat treatments at 550 °C and 650 °C on the fatigue performance and corresponding crack initiation behavior of forged Inconel 718 has been investigated. Four-point bending fatigue tests were conducted under load control on specimens of two groups, i.e. a polished group and a broached group, with totally six different surface conditions. Compared to the as-polished specimens, a beneficial effect of the broaching operation was found on the fatigue life due to the high compressive residual stresses on the broached surface which transfer the fatigue crack initiation from surface to sub-surface regions. Introducing a heat treatment generally deteriorated the fatigue performance of the alloy because of the oxidation assisted crack initiation, while the reduction in fatigue life was found to be more remarkable for the broached specimens, in particular when heat treated at 650 °C, as the thermal impact also led to a great relaxation of the compressive residual stresses; the combined effect, together with the substantial anomalies created by broaching on the surface, such as cracked carbides and machining grooves, caused an increased propensity to surface cracking in fatigue and consequently a loss of the lifetime. Furthermore, it was found that the occurrence of surface recrystallization at elevated temperatures in machined Inconel 718 could lead to intergranular oxidation, creating micro-notches as preferable sites for the fatigue crack initiation.

    Keywords
    Broaching, Inconel 718, Surface integrity, thermal impact, Fatigue, Crack initiation
    National Category
    Other Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-129843 (URN)10.1016/j.msea.2016.06.030 (DOI)000381165400016 ()
    Note

    Funding agencies: Faculty grant SFO-MAT-LiU at Linkoping University [2009-00971]; Siemens Industrial Turbomachinery AB

    Available from: 2016-06-29 Created: 2016-06-29 Last updated: 2017-11-28
    3. Nano-scale characterization of white layer in broached Inconel 718
    Open this publication in new window or tab >>Nano-scale characterization of white layer in broached Inconel 718
    Show others...
    2017 (English)In: Materials Science & Engineering: A, ISSN 0921-5093, E-ISSN 1873-4936, Vol. 684, p. 373-384Article in journal (Refereed) Published
    Abstract [sv]

    The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.

    TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.

    Place, publisher, year, edition, pages
    Amsterdam: Elsevier, 2017
    Keywords
    Surface integrity; White layer; Broaching; Inconel 718; Adiabatic shear band; Mechanically-based subgrain rotation
    National Category
    Materials Chemistry Inorganic Chemistry Other Materials Engineering Paper, Pulp and Fiber Technology Condensed Matter Physics
    Identifiers
    urn:nbn:se:liu:diva-134123 (URN)10.1016/j.msea.2016.12.045 (DOI)000393938300045 ()
    Note

    Funding agencies: AForsk Foundation [15-334];  [2009-00971]

    Available from: 2017-01-24 Created: 2017-01-24 Last updated: 2017-11-29Bibliographically approved
    4. Surface Integrity and Fatigue Performance of Inconel 718 in Wire Electrical Discharge Machining
    Open this publication in new window or tab >>Surface Integrity and Fatigue Performance of Inconel 718 in Wire Electrical Discharge Machining
    2016 (English)In: 3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, Vol. 45, p. 307-310Conference paper, Published paper (Refereed)
    Abstract [en]

    This paper presents a study to characterize the surface integrity in wire electrical discharge machining (EDM) of Inconel 718 and investigate its effect on the fatigue performance of the alloy in a four-point bending fatigue mode at room temperature. The EDM process generates a rough recast surface with multi-types of defects. Surface craters, micro-cracks and micro-voids within the recast layer have been found to be most detrimental from the point of view of fatigue as they could provide many preferential initiation sites for fatigue cracks. As a consequence, the specimens with an EDM cut surface show an approximately 30% decrease in fatigue life compared to those with a polished surface, and multiple crack origins were observed on the fracture surface. The high tensile residual stresses generated on the EDM cut surface, on the other hand, are also believed to be partly responsible for the loss in fatigue life of the alloy machined by EDM.

    Series
    Procedia CIRP, ISSN 2212-8271
    Keywords
    wire electrical discharge machining (wire EDM), surface integrity, fatigue, crack initiation, Inconel 718
    National Category
    Materials Engineering Other Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-130582 (URN)10.1016/j.procir.2016.02.053 (DOI)000417326500077 ()
    Conference
    3rd CIRP Conference on Surface Integrity (CIRP CSI)8-10 June, 2016, Charlotte, USA
    Note

    Funding agencies: Siemens Industrial Turbomachinery AB; Strategic Faculty Grant AFM at Linkoping University

    Available from: 2016-08-17 Created: 2016-08-17 Last updated: 2018-03-28
    5. Effect of Cooling and Shot Peening on Residual Stresses and Fatigue Performance of Milled Inconel 718
    Open this publication in new window or tab >>Effect of Cooling and Shot Peening on Residual Stresses and Fatigue Performance of Milled Inconel 718
    Show others...
    2017 (English)In: Residual Stresses 2016 ICRS 10 / [ed] T.M. Holden, O. Muránsky, and L. Edwards, 2017, Vol. 2, p. 13-18Conference paper, Published paper (Refereed)
    Abstract [en]

    The present study highlights the effect of cooling and post-machining surface treatment of shot peening on the residual stresses and corresponding fatigue life of milled superalloy Inconel 718. It was found that tensile residual stresses were created on the milled surface, regardless of the use of coolant, however, the wet milling operation led to a lower surface tension and a reduced thickness of the tensile layer. The shot peening performed on the dry-milled specimens completely annihilated the surface tensile residual tresses and introduced a high level of surface compression. A comparable fatigue life for the wet-milled specimens was obtained as compared with the specimens prepared by dry milling. This is very likely attributed to that the milling-induced surface damage with respect to cracked non-metallic inclusions is the predominant cause of the fatigue failure. The presence of the compressive layer induced by shot peening resulted in a significant increase of the fatigue life and strength, while the extent to which the lifetime was prolonged was decreased as the applied load was increased.

    Series
    Materials Research Proceedings, ISSN 2474-395X
    Keywords
    Residual stresses, surface integrity, milling, shot peening, superalloys, fatigue
    National Category
    Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-132001 (URN)10.21741/9781945291173-3 (DOI)000401041500003 ()978-1-9452-9116-6 (ISBN)
    Conference
    10th International Conference on Residual Stresses ICRS-10, Sydney, Australia, 3-8 July 2016
    Note

    Funding agencies: Linkoping University [2009-00971]; Ytstruktur Arboga AB; Siemens Industrial Turbomachinery AB

    Available from: 2016-10-13 Created: 2016-10-13 Last updated: 2017-06-13Bibliographically approved
  • 2.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Surface Integrity of Broached Inconel 718 and Influence of Thermal Exposure2014Licentiate thesis, comprehensive summary (Other academic)
    Abstract [en]

    Inconel 718 is a nickel-based superalloy that is extensively used as a disc material in gas turbine engines. The service life of gas turbine discs is normally governed by the modes of material degradation and fatigue failure since they work mostly at high temperatures and are subjected to cyclic mechanical loadings. Fatigue failures often start with the initiation of cracks at the surface and the precise details of the failure process significantly depend on the surface conditions. In turbine disc production, one of the last manufacturing steps is to broach root fixings, commonly of fir-tree design, for blade mounting. It has always been a challenge when machining Inconel 718 due to its high strength retention at elevated temperatures, rapid work hardening, as well as low thermal conductivity. This usually leads to rapid tool wear, and consequently shorter tool life, and at the end to the deterioration of the surface integrity of the machined components.

    The aim of this licentiate thesis is to increase our knowledge about the surface integrity, especially microstructure and residual stresses, of broached Inconel 718 and its stability under thermal exposure. This knowledge can later be used for analyzing the initiation and propagation of fatigue cracks in broached Inconel 718, particularly in the case of high temperature fatigue, thereby giving a better understanding of the failure mechanism of gas turbine discs from a fatigue point of view.

    A broaching operation has been performed using similar cutting conditions as that used in turbo machinery industries for producing fir-tree root fixings. In addition, service damages were analyzed in a retired dis of Inconel 718. Surface defects, severe plastic deformation and generation of high tensile residual stresses have been found to be the main damages to the surface integrity caused by the broaching operation. The machining induced plastic deformation was found to accelerate the microstructural degradation beneath the broached surface when subjected to thermal exposure. The surface tensile residual stresses can be completely removed after short thermal exposure, the tensile layer in the sub-surface region, however, exhibited a high resistance to stress relief at high temperatures. The damage analysis on the retired disc indicated that presence of the highly deformed layer on the machined surface is negative for preventing the occurrence of fretting fatigue in turbine discs.

    List of papers
    1. Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
    Open this publication in new window or tab >>Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures
    Show others...
    2016 (English)In: Metallurgical and Materials Transactions. A, ISSN 1073-5623, E-ISSN 1543-1940, Vol. 47A, no 7, p. 3664-3676Article in journal (Refereed) Published
    Abstract [en]

    The current study focused on the surface integrity issues associated with broaching of Inconel 718 and the structural stability of the broached specimen at high temperatures, mainly involving the microstructural changes and residual stress relaxation. The broaching operation was performed using similar cutting conditions as that used in turbo machinery industries for machining fir-tree root fixings on turbine disks. Thermal exposure was conducted at 723 K, 823 K, and 923 K (450 A degrees C, 550 A degrees C, and 650 A degrees C) for 30, 300, and 3000 hours, respectively. Surface cavities and debris dragging, sub-surface cracks, high intensity of plastic deformation, as well as the generation of tensile residual stresses were identified to be the main issues in surface integrity for the broached Inconel 718. When a subsequent heating was applied, surface recrystallization and alpha-Cr precipitation occurred beneath the broached surface depending on the applied temperature and exposure time. The plastic deformation induced by the broaching is responsible for these microstructural changes. The surface tension was completely relaxed in a short time at the temperature where surface recrystallization occurred. The tensile layer on the sub-surface, however, exhibited a much higher resistance to the stress relief annealing. Oxidation is inevitable at high temperatures. The study found that the surface recrystallization could promote the local Cr diffusion on the broached surface.

    Place, publisher, year, edition, pages
    Springer, 2016
    Keywords
    Structural integrity, Broaching, Inconel 718, Plastic deformation, Residual stresses, Thermal exposure, Superalloy
    National Category
    Materials Engineering Other Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-111056 (URN)10.1007/s11661-016-3515-6 (DOI)000377434700041 ()
    Funder
    Linköpings universitet, 2009-00971
    Note

    The original title of this article when published in manuscript form was Structural integrity of broached Inconel 718 subjected to thermal exposure.

    Available from: 2014-10-06 Created: 2014-10-06 Last updated: 2018-02-27Bibliographically approved
    2. Effect of thermal exposure on microstructure and nano-hardness of broached Inconel 718
    Open this publication in new window or tab >>Effect of thermal exposure on microstructure and nano-hardness of broached Inconel 718
    Show others...
    2014 (English)In: MATEC Web of Conferences Vol. 14 (2014) EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications: Session 8: Recrystallization and Grain Growth / [ed] J.Y. Guédou and J. Choné, Les Ulis, France: E D P Sciences , 2014, p. 08002-p.1-08002-p.6Conference paper, Published paper (Refereed)
    Abstract [en]

    Inconel 718 is a high strength, heat resistant superalloy that is used extensively for components in hot sections of gas turbine engines. This paper presents an experimental study on the thermal stability of broached Inconel 718 in terms of microstructure and nano-hardness. The broaching process used in this study is similar to that used in gas turbine industries for machining fir-tree root fixings on turbine discs. Severe plastic deformation was found under the broached surface. The plastic deformation induces a work-hardened layer in the subsurface region with a thickness of ∼50 μm. Thermal exposure was conducted at two temperatures, 550 C and 650 C respectively, for 300 h. Recrystallization occurs in the surface layer during thermal exposure at 550 C and α-Cr precipitates as a consequence of the growth of recrystallized δ phases. More recrystallized grains with a larger size form in the surface layer and the α-Cr not only precipitates in the surface layer, but also in the sub-surface region when the thermal exposure temperature goes up to 650 C. The thermal exposure leads to an increase in nano-hardness both in the work-hardened layer and in the bulk material due to the coarsening of the main strengthening phase γ′′.

    Place, publisher, year, edition, pages
    Les Ulis, France: E D P Sciences, 2014
    Series
    MATEC Web of Conferences, ISSN 2261-236X ; Volume 14
    Keywords
    Structural integrity, Broaching, Inconel 718, Plastic deformation, Residual stresses, Thermal exposure, Superalloy
    National Category
    Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-111058 (URN)10.1051/matecconf/20141408002 (DOI)000351930400024 ()2-s2.0-84906910411 (Scopus ID)
    Conference
    2nd European Symposium on Superalloys and Their Applications, May 12-16, 2014, French Riviera, Giens, France
    Available from: 2014-10-06 Created: 2014-10-06 Last updated: 2016-09-07Bibliographically approved
    3. Analysis of Thermal Effect on Residual Stresses of Broached Inconel 718
    Open this publication in new window or tab >>Analysis of Thermal Effect on Residual Stresses of Broached Inconel 718
    Show others...
    2014 (English)Conference paper, Published paper (Refereed)
    Abstract [en]

    Inconel 718 is a nickel based superalloy that is widely used as a turbine disc material in gas turbine industries. This study details the effect of thermal exposure on the residual stresses produced when broaching Inconel 718. The chosen parameters for broaching in this study are similar to those used when manufacturing turbine discs. The broaching operation produced a high level of tensile residual stresses at the broached surface. A layer with tensile residual stresses was formed in the sub-surface region, followed by a layer several times thicker with compressive residual stresses. Thermal exposure was conducted at 550 °C. The depth distributions of residual stresses after thermal exposure are presented and discussed in this paper. Complete relaxation of the surface tensile residual stresses was observed after 30 h thermal exposure, whereas the 3000 h thermal exposure influenced both the surface and sub-surface residual stress states.

    Place, publisher, year, edition, pages
    Trans Tech Publications Inc., 2014
    Series
    Advanced Materials Research, ISSN 1022-6680 ; 996
    Keywords
    Broaching, Incone 718, Residual Stresses, Thermal Exposure, Recrystallization
    National Category
    Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-111057 (URN)10.4028/www.scientific.net/AMR.996.574 (DOI)000348282100093 ()
    Conference
    ECRS9 6-10 July, Troyes, Frankrike
    Available from: 2014-10-06 Created: 2014-10-06 Last updated: 2015-02-20Bibliographically approved
    4. Damage analysis of a retired gas turbine disc
    Open this publication in new window or tab >>Damage analysis of a retired gas turbine disc
    2014 (English)In: Proceedings of the 2014 Energy Materials Conference, John Wiley & Sons, 2014, p. 405-410Conference paper, Published paper (Refereed)
    Abstract [en]

    Gas turbine discs operate mostly at high temperature gradients and are subjected to mechanical loads simultaneously. The high thermal and mechanical loads eventually could result in degradation and damages in disc material, thereby increasing the risk of disc failure. In this study, a damage analysis was performed in a retired gas turbine disc made of Inconel 718. Oxidation attack and microstructural degradation as the consequence of the high service temperature have been found to be the main damages that take place in the non-contact area of the retired disc. In the blade/disc contact area, fretting fatigue occurs, with a result that cracks initiate from the oxide/metal interface and propagate in the disc alloy parallel to the sliding direction of fretting, consequently reducing the stability and safety of the disc. Meantime, oxygen diffuses into the fretting fatigue cracks, thereby exacerbating the oxidation attack. A multi-layered scale with periodic formation of the Fe-oxide/spinel layer and the metallic layer is formed on the contact surface. In both contact and non-contact area, recrystallization and α-Cr precipitation take place in the surface layer of the disc alloy. The locations where α-Cr precipitates are commonly considered to be the natural sites for mechanical weakness.

    Place, publisher, year, edition, pages
    John Wiley & Sons, 2014
    National Category
    Materials Engineering
    Identifiers
    urn:nbn:se:liu:diva-111060 (URN)000364592900047 ()978-1-119-02794-2 (ISBN)
    Conference
    Energy Materials 2014 TMS, November 4-6, 2014, Xi’an, China
    Available from: 2014-10-06 Created: 2014-10-06 Last updated: 2015-12-07Bibliographically approved
  • 3.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Hörnqvist Colliander, Magnus
    Department of Physics, Chalmers University of Technology, Gothenburg, Sweden.
    Sundell, Gustav
    Department of Physics, Chalmers University of Technology, Gothenburg, Sweden.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Zhou, Jinming
    Division of Production and Materials Engineering, Lund University, Sweden.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Nano-scale characterization of white layer in broached Inconel 7182017In: Materials Science & Engineering: A, ISSN 0921-5093, E-ISSN 1873-4936, Vol. 684, p. 373-384Article in journal (Refereed)
    Abstract [sv]

    The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.

    TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.

  • 4.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Gustafsson, David
    Siemens Industrial Turbomachinery AB, SE-61283 Finspång, Sweden.
    On the Conjoint Influence of Broaching and Heat Treatment on Bending Fatigue Behavior of Inconel 7182016In: Materials Science & Engineering: A, ISSN 0921-5093, E-ISSN 1873-4936, Vol. 671, p. 158-169Article in journal (Refereed)
    Abstract [en]

    In this study, the conjoint effect of a broaching operation, similar to that used for machining fir-tree slots on turbine discs, and subsequent heat treatments at 550 °C and 650 °C on the fatigue performance and corresponding crack initiation behavior of forged Inconel 718 has been investigated. Four-point bending fatigue tests were conducted under load control on specimens of two groups, i.e. a polished group and a broached group, with totally six different surface conditions. Compared to the as-polished specimens, a beneficial effect of the broaching operation was found on the fatigue life due to the high compressive residual stresses on the broached surface which transfer the fatigue crack initiation from surface to sub-surface regions. Introducing a heat treatment generally deteriorated the fatigue performance of the alloy because of the oxidation assisted crack initiation, while the reduction in fatigue life was found to be more remarkable for the broached specimens, in particular when heat treated at 650 °C, as the thermal impact also led to a great relaxation of the compressive residual stresses; the combined effect, together with the substantial anomalies created by broaching on the surface, such as cracked carbides and machining grooves, caused an increased propensity to surface cracking in fatigue and consequently a loss of the lifetime. Furthermore, it was found that the occurrence of surface recrystallization at elevated temperatures in machined Inconel 718 could lead to intergranular oxidation, creating micro-notches as preferable sites for the fatigue crack initiation.

  • 5.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Moverare, Johan
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Damage analysis of a retired gas turbine disc2014In: Proceedings of the 2014 Energy Materials Conference, John Wiley & Sons, 2014, p. 405-410Conference paper (Refereed)
    Abstract [en]

    Gas turbine discs operate mostly at high temperature gradients and are subjected to mechanical loads simultaneously. The high thermal and mechanical loads eventually could result in degradation and damages in disc material, thereby increasing the risk of disc failure. In this study, a damage analysis was performed in a retired gas turbine disc made of Inconel 718. Oxidation attack and microstructural degradation as the consequence of the high service temperature have been found to be the main damages that take place in the non-contact area of the retired disc. In the blade/disc contact area, fretting fatigue occurs, with a result that cracks initiate from the oxide/metal interface and propagate in the disc alloy parallel to the sliding direction of fretting, consequently reducing the stability and safety of the disc. Meantime, oxygen diffuses into the fretting fatigue cracks, thereby exacerbating the oxidation attack. A multi-layered scale with periodic formation of the Fe-oxide/spinel layer and the metallic layer is formed on the contact surface. In both contact and non-contact area, recrystallization and α-Cr precipitation take place in the surface layer of the disc alloy. The locations where α-Cr precipitates are commonly considered to be the natural sites for mechanical weakness.

  • 6.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Avdovic, Pajazit
    Siemens Industrial Turbomachinery, Finspång, Sweden.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Karlsson, Fredrik
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Zhou, Jinming
    Division of Production and Materials Engineering, Lund university.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Analysis of Thermal Effect on Residual Stresses of Broached Inconel 7182014Conference paper (Refereed)
    Abstract [en]

    Inconel 718 is a nickel based superalloy that is widely used as a turbine disc material in gas turbine industries. This study details the effect of thermal exposure on the residual stresses produced when broaching Inconel 718. The chosen parameters for broaching in this study are similar to those used when manufacturing turbine discs. The broaching operation produced a high level of tensile residual stresses at the broached surface. A layer with tensile residual stresses was formed in the sub-surface region, followed by a layer several times thicker with compressive residual stresses. Thermal exposure was conducted at 550 °C. The depth distributions of residual stresses after thermal exposure are presented and discussed in this paper. Complete relaxation of the surface tensile residual stresses was observed after 30 h thermal exposure, whereas the 3000 h thermal exposure influenced both the surface and sub-surface residual stress states.

  • 7.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Avdovic, Pajazit
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Zhou, Jinming
    Division of Production and Materials Engineering, Lund university, Sweden.
    Moverare, Johan
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Karlsson, Fredrik
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Effect of thermal exposure on microstructure and nano-hardness of broached Inconel 7182014In: MATEC Web of Conferences Vol. 14 (2014) EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications: Session 8: Recrystallization and Grain Growth / [ed] J.Y. Guédou and J. Choné, Les Ulis, France: E D P Sciences , 2014, p. 08002-p.1-08002-p.6Conference paper (Refereed)
    Abstract [en]

    Inconel 718 is a high strength, heat resistant superalloy that is used extensively for components in hot sections of gas turbine engines. This paper presents an experimental study on the thermal stability of broached Inconel 718 in terms of microstructure and nano-hardness. The broaching process used in this study is similar to that used in gas turbine industries for machining fir-tree root fixings on turbine discs. Severe plastic deformation was found under the broached surface. The plastic deformation induces a work-hardened layer in the subsurface region with a thickness of ∼50 μm. Thermal exposure was conducted at two temperatures, 550 C and 650 C respectively, for 300 h. Recrystallization occurs in the surface layer during thermal exposure at 550 C and α-Cr precipitates as a consequence of the growth of recrystallized δ phases. More recrystallized grains with a larger size form in the surface layer and the α-Cr not only precipitates in the surface layer, but also in the sub-surface region when the thermal exposure temperature goes up to 650 C. The thermal exposure leads to an increase in nano-hardness both in the work-hardened layer and in the bulk material due to the coarsening of the main strengthening phase γ′′.

  • 8.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Avdovic, Pajazit
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Zhou, Jinming
    Division of Production and Materials Engineering, Lund university.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures2016In: Metallurgical and Materials Transactions. A, ISSN 1073-5623, E-ISSN 1543-1940, Vol. 47A, no 7, p. 3664-3676Article in journal (Refereed)
    Abstract [en]

    The current study focused on the surface integrity issues associated with broaching of Inconel 718 and the structural stability of the broached specimen at high temperatures, mainly involving the microstructural changes and residual stress relaxation. The broaching operation was performed using similar cutting conditions as that used in turbo machinery industries for machining fir-tree root fixings on turbine disks. Thermal exposure was conducted at 723 K, 823 K, and 923 K (450 A degrees C, 550 A degrees C, and 650 A degrees C) for 30, 300, and 3000 hours, respectively. Surface cavities and debris dragging, sub-surface cracks, high intensity of plastic deformation, as well as the generation of tensile residual stresses were identified to be the main issues in surface integrity for the broached Inconel 718. When a subsequent heating was applied, surface recrystallization and alpha-Cr precipitation occurred beneath the broached surface depending on the applied temperature and exposure time. The plastic deformation induced by the broaching is responsible for these microstructural changes. The surface tension was completely relaxed in a short time at the temperature where surface recrystallization occurred. The tensile layer on the sub-surface, however, exhibited a much higher resistance to the stress relief annealing. Oxidation is inevitable at high temperatures. The study found that the surface recrystallization could promote the local Cr diffusion on the broached surface.

  • 9.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Zhou, Jinming
    Bushlya, Volodymyr
    Saoubi, Rachid M
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Effect of Cutting Conditions on Machinability of AD 730 TM during High Speed Turning with PCBN Tools2017Conference paper (Refereed)
  • 10.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Zhou, Jinming
    Division of Production and Materials Engineering, Lund University, Lund, Sweden.
    M'Saoubi, Rachid
    Seco Tools AB, Fagersta, Sweden.
    Gustafsson, David
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Effect of Machining Parameters on Cutting Force and Surface Integrity when High-Speed Turning AD730™ with PCBN Tools2019In: The International Journal of Advanced Manufacturing Technology, ISSN 0268-3768, E-ISSN 1433-3015, Vol. 100, no 9-12, p. 2601-2615Article in journal (Refereed)
    Abstract [en]

    The novel wrought nickel-based superalloy, AD 730™, is a good candidate material for turbine disc applications at high temperatures beyond 650 °C. The present study focuses on the machining performance of this newly developed alloy under high-speed turning conditions with advanced PCBN tools. Meanwhile, the machined surface integrity as influenced by cutting speed and feed rate was also investigated. The surface integrity was thoroughly characterized in terms of surface roughness and morphology, machining-induced plastic deformation, white layer formation, and residual stresses. It has been found that the cutting speed and feed rate had a strong effect on the cutting forces and resultant surface integrity. The cutting forces required when machining the alloy were gradually reduced with increasing cutting speed, while at 250 m/min and above, the flank tool wear became stronger which led to increased thrust force and feed force. A higher feed rate, on the other hand, always resulted in higher cutting forces. Increasing the cutting speed and feed rate in general deteriorated the surface integrity. High cutting speeds within the range of 200–250 m/min and a low feed rate of 0.1 mm/rev are preferable in order to implement more cost-effective machining without largely reducing the surface quality achieved. The formation of tensile residual stresses on the machined AD 730™, however, could be of a concern where good fatigue resistance is critical.

  • 11.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Widman, Olle
    Ytstruktur Arboga AB, Arboga, Sweden.
    Gustafsson, David
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Effect of Cooling and Shot Peening on Residual Stresses and Fatigue Performance of Milled Inconel 7182017In: Residual Stresses 2016 ICRS 10 / [ed] T.M. Holden, O. Muránsky, and L. Edwards, 2017, Vol. 2, p. 13-18Conference paper (Refereed)
    Abstract [en]

    The present study highlights the effect of cooling and post-machining surface treatment of shot peening on the residual stresses and corresponding fatigue life of milled superalloy Inconel 718. It was found that tensile residual stresses were created on the milled surface, regardless of the use of coolant, however, the wet milling operation led to a lower surface tension and a reduced thickness of the tensile layer. The shot peening performed on the dry-milled specimens completely annihilated the surface tensile residual tresses and introduced a high level of surface compression. A comparable fatigue life for the wet-milled specimens was obtained as compared with the specimens prepared by dry milling. This is very likely attributed to that the milling-induced surface damage with respect to cracked non-metallic inclusions is the predominant cause of the fatigue failure. The presence of the compressive layer induced by shot peening resulted in a significant increase of the fatigue life and strength, while the extent to which the lifetime was prolonged was decreased as the applied load was increased.

  • 12.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Zhou, Jinming
    Division of Production and Materials Engineering, Lund university.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Bushlya, Volodymyr
    Division of Production and Materials Engineering, Lund university.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    ECCI and EBSD Study of Surbsurface Damages in High Speed Turning of Inconel 718 under Different Tools and Machining Parameters2013Conference paper (Refereed)
  • 13.
    Chen, Zhe
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Zhou, Jinming
    Division of Production and Materials Engineering,Lunds University, Sweden.
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    M'Saoubi, R
    Seco Tools AB, Fagersta, Sweden.
    Gustafsson, David
    Siemens Industrial Turbomachinery AB, Finspång, Sweden.
    Palmert, Frans
    Siemens Industrial Turbomachinery AB, Finspång.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Plastic Deformation and Residual Stress in High Speed Turning of AD730™ Nickel-based Superalloy with PCBN and WC Tools2018In: Procedia CIRP 71 (2018) pp 440-445, Elsevier, 2018, Vol. 71, p. 440-445Conference paper (Refereed)
    Abstract [en]

    A higher gas turbine efficiency can be achieved by increasing the operating temperature in hot sections. AD730™ is a recently-developed wrought/cast nickel-based superalloy which can maintain excellent mechanical properties above 700 ℃. However, machining of AD730™ could be a difficult task like other nickel-based superalloys. Therefore, studies are needed with respect to the machinability of this new alloy.

    In this paper, high-speed turning was performed on AD730™ using polycrystalline cubic boron nitride (PCBN) tools and coated tungsten carbide (WC) tools at varied cutting speeds. The surface integrity was assessed in two important aspects, i.e., surface and sub-surface plastic deformation and residual stresses. The PCBN tools generally showed better performance compared with the WC tools since it led to reduced machining time without largely compromising the surface integrity achieved. The optimal cutting speed was identified in the range of 200-250 m/min when using the PCBN tools, which gives rise to a good combination of machining efficiency and surface integrity. The further increase of the cutting speed to 300 m/min resulted in severe and deep plastic deformation. Meanwhile, a continuous white layer was formed at the machined surface. When turning with the WC tools, the increased cutting speed from 80 m/min to 100 m/min showed very little effect with respect to the plastic deformation on the machined surface. It was found that tensile residual stresses were developed on all machined surfaces no matter when the PCBN or WC tools were used, and the surface tension was generally increased with increasing cutting speed. The tensile layer might need to be modified by e.g., post-machining surface treatments such as shot peening, if taking good fatigue performance into consideration.

  • 14.
    Eriksson, Robert
    et al.
    Linköping University, Department of Management and Engineering, Solid Mechanics. Linköping University, Faculty of Science & Engineering.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Jonnalagadda, Krisha Praveen
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    BENDING FATIGUE OF THERMAL BARRIER COATINGS2017In: PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 6, AMER SOC MECHANICAL ENGINEERS , 2017, article id V006T24A004Conference paper (Refereed)
    Abstract [en]

    Thermal barrier coatings (TBCs) are ceramic coatings used in gas turbines to lower the base metal temperature. During operation, the TBC may fail through, for example, fatigue. In the present study, a TBC system deposited on a Ni-base alloy was tested in tensile bending fatigue. The TBC system was tested as-sprayed and oxidized and two load levels were used. After interrupting the tests, at 10000-50000 cycles, the TBC tested at the lower load had extensive delamination damage whereas the TBC tested at the higher load was relatively undamaged. At the higher load, the TBC formed vertical cracks which relieved the stresses in the TBC and retarded delamination damage. A finite element analysis was used to establish a likely vertical crack configuration (spacing and depth) and it could be confirmed that the corresponding stress drop in the TBC should prohibit delamination damage at the higher load.

  • 15.
    Eriksson, Robert
    et al.
    Linköping University, Department of Management and Engineering, Solid Mechanics. Linköping University, Faculty of Science & Engineering.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    A low cycle fatigue life model for a shot peened gas turbine disc alloy2019In: International Journal of Fatigue, ISSN 0142-1123, E-ISSN 1879-3452, Vol. 124, p. 34-41Article in journal (Refereed)
    Abstract [en]

    Turbine disks in gas turbines are subjected to cyclic load at high temperature, making, especially the fir tree type blade attachments, susceptible to fatigue. Shot peening of the fir tree attachments may be used to increase the fatigue life by introducing compressive residual stresses. In the current study, both polished and shot peened notched specimens made from alloy 718 were subjected to low cycle fatigue at 450-550 degrees C. The shot peening generally increased the fatigue life, although the effect diminished for high loads. It was shown that the effect of shot peening could be handled as mean stress effects in a life model based on a Smith-Watson-Topper (SWT) type parameter, sigma(max)Delta epsilon/2. A material model which captured the mean stress was set up to get the SWT parameter at the notch root. It was shown that thermal relaxation of residual stresses and initial strain hardening from cold work could be excluded from the finite element analysis used to establish the mean stress; this since the plasticity in the first cycle dominated the plastic deformation of the specimen. Overall, the SWT-based life model worked satisfactorily. However, the prediction of correct mean stresses at 550 degrees C proved somewhat difficult as the degree of mean stress relaxation at this temperature varies widely in available literature data.

  • 16.
    Peng, Ru
    et al.
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Moverare, Johan
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Avdovic, Pajazit
    Siemens Industrial Turbomachinery, Finspång.
    Billenius, Annethe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Influence of Vibration and Heat Treatment on Residual Stress of a Machined 12%Cr-Steeel2014Conference paper (Refereed)
    Abstract [en]

    In this paper we investigated the influence of vibratory stress relieving technique, which is widely used for stress relaxation of weld and casting components/structure, on machining residual stresses in a ring-component of 12% Cr-steel. It was shown that the employed vibratory treatment, without significantly altering the microstructure, turned the surface layer from tension into compression but retained the compressive residual stresses in the subsurface. In comparison, a stress relieving heat treatment, included as a reference in the study, removed completely the surface tensile residual stresses and reduced the subsurface compressive residual stresses to a low level. Significant microstructural changes in the form of recrystallization also occurred in a thin surface layer of the machining affected zone after the heat treatment.

  • 17. Persson, H
    et al.
    Johansson, D
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Lenrich, F
    M'Saoubi, R
    Gustafsson, David
    Bushlya, Volodymyr
    Stahl, JE
    Zhou, Jinming
    Modelling Tool Life in High Speed Machining of AD730™2018In: Procedia Manufacturing 25 (2018) pp 316-321, 2018, Vol. 25, p. 316-321Conference paper (Refereed)
  • 18.
    Zhou, Jinming
    et al.
    Division of Production and Materials Engineering, Lund university.
    Bushlya, Volodymyr
    Division of Production and Materials Engineering, Lund university.
    Peng, Ru
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Johansson, Sten
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, The Institute of Technology.
    Stahl, Jan-Erik
    Division of Production and Materials Engineering, Lund university.
    Analysis of Subsurface Microstructure and Residual Stresses in Machined Inconel 718 with PCBN and Al2O3-SiCw Tools2014In: 2ND CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), Elsevier, 2014, Vol. 13, p. 150-155Conference paper (Refereed)
    Abstract [en]

    Subsurface microstructural alterations and residual stresses caused by machining significantly affect component lifetime and performance by influencing fatigue, creep, and stress corrosion cracking resistance. Assessing the surface quality of a machined part by characterizing subsurface microstructural alterations and residual stresses is essential for ensuring part performance and lifetime in aero-engines and power generators. This comparative study characterizes and analyzes subsurface microstructural alterations and residual stresses in Inconel 718 subjected to high-speed machining with PCBN and whisker-reinforced ceramic cutting tools. Effects of cutting tool materials and microgeometry on subsurface deformation, microstructural alterations, and residual stresses were investigated. Surface and subsurface regions of machined specimens were investigated using X-ray diffraction, electron channeling contrast imaging, and electron back-scatter diffraction to characterize microstructural alterations and measure deformation intensity and depth.

  • 19. Zhou, Jinming
    et al.
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering. Siemens Industrial Turbomachinery AB, Finspång.
    Persson, Henrik
    Div of Production and Materials Engineering, Lunds University.
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    M'Saoubi, Rachid
    Seco Tools AB, Fagersta.
    Gustafsson, David
    Siemens Industrial Turbomachinery AB, Finspång.
    Comparative Assessment of the Surface Integrity of AD730 and IN718 Superalloys in High-Speed Turning with a CBN Tool2019In: Journal of Manufacturing and Materials Processing, ISSN 2504-4494, Vol. 3, no 3, article id 73Article in journal (Refereed)
    Abstract [en]

    Nickel-based superalloys are typical materials used in components of aeroengines and gas turbine machinery. The strength properties of these alloys at high temperatures are crucial not only to the performance (e.g., power generation efficiency, energy consumption, and greenhouse gas emissions) of aeroengines and industrial gas turbines, but also to machinability during component manufacturing. This study comparatively evaluated the surface integrity of two superalloys, AD730® and Inconel 718 (IN718), during high-speed finishing turning using cubic boron nitride (CBN) tools. IN718 is a conventional superalloy used for the hot section components of aeroengines and industrial gas turbines, while AD730® is a novel superalloy with enhanced high-temperature mechanical properties and good potential as a next-generation superalloy for these components. High-speed turning tests of two superalloys were conducted using a CBN cutting tool and jet stream cooling. The achieved surface integrity of the AD730® and IN718 superalloys was characterized and analyzed to assess the comparability of these alloys. 

  • 20. Zhou, Jinming
    et al.
    Persson, H
    Chen, Zhe
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    M'Saoubi, R
    Gustafsson, David
    Bushlya, Volodymyr
    Akujärvi, V
    Stahl, JE
    Peng, Ru Lin
    Linköping University, Department of Management and Engineering, Engineering Materials. Linköping University, Faculty of Science & Engineering.
    Surface Characterization of AD730™ Part Produced in High Speed Turning with CBN Tool2018In: Procedia CIRP 71 (2018) / [ed] Elsevier, 2018, Vol. 71, p. 215-220Conference paper (Refereed)
1 - 20 of 20
CiteExportLink to result list
Permanent link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • oxford
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf