Background: This study examines the destiny of macromolecules in different full-scale biogas processes. From previousstudies it is clear that the residual organic matter in outgoing digestates can have significant biogas potential,but the factors dictating the size and composition of this residual fraction and how they correlate with the residualmethane potential (RMP) are not fully understood. The aim of this study was to generate additional knowledge of thecomposition of residual digestate fractions and to understand how they correlate with various operational and chemicalparameters. The organic composition of both the substrates and digestates from nine biogas plants operating onfood waste, sewage sludge, or agricultural waste was characterized and the residual organic fractions were linked tosubstrate type, trace metal content, ammonia concentration, operational parameters, RMP, and enzyme activity.

Results: Carbohydrates represented the largest fraction of the total VS (32–68%) in most substrates. However, inthe digestates protein was instead the most abundant residual macromolecule in almost all plants (3–21 g/kg). Thedegradation efficiency of proteins generally lower (28–79%) compared to carbohydrates (67–94%) and fats (86–91%).High residual protein content was coupled to recalcitrant protein fractions and microbial biomass, either from thesubstrate or formed in the degradation process. Co-digesting sewage sludge with fat increased the protein degradationefficiency with 18%, possibly through a priming mechanism where addition of easily degradable substrates alsotriggers the degradation of more complex fractions. In this study, high residual methane production (> 140 L CH4/kgVS) was firstly coupled to operation at unstable process conditions caused mainly by ammonia inhibition (0.74 mgNH3-N/kg) and/or trace element deficiency and, secondly, to short hydraulic retention time (HRT) (55 days) relative tothe slow digestion of agricultural waste and manure.

Conclusions: Operation at unstable conditions was one reason for the high residual macromolecule content andhigh RMP. The outgoing protein content was relatively high in all digesters and improving the degradation of proteinsrepresents one important way to increase the VS reduction and methane production in biogas plants. Post-treatment

Enzyme discovery in individual strains of microorganisms is compromised by the limitations of pure culturing. In principle, metaproteomics allows for fractionation and study of different parts of the protein complement but has hitherto mainly been used to identify intracellular proteins. However, the extracellular environment is also expected to comprise a wealth of information regarding important proteins. An absolute requirement for metaproteomic studies of protein expression, and irrespective of downstream methods for analysis, is that sample preparation methods provide clean, concentrated and representative samples of the protein complement. A battery of methods for concentration, extraction, precipitation and resolubilization of proteins in the extracellular environment of a constructed microbial community was assessed by means of 2D gel electrophoresis and image analysis to elucidate whether it is possible to make the extracellular protein complement available for metaproteomic analysis. Most methods failed to provide pure samples and therefore negatively influenced protein gel migration and gel background clarity. However, one direct precipitation method (TCA-DOC/acetone) and one extraction/precipitation method (phenol/methanol) provided complementary high quality 2D gels that allowed for high spot detection ability and thereby also spot detection of less abundant extracellular proteins.

Background: Enzymatic treatment of lignocellulosic material for increased biogas production has so far focused on pretreatment methods. However, often combinations of enzymes and different physicochemical treatments are necessary to achieve a desired effect. This need for additional energy and chemicals compromises the rationale of using enzymes for low energy treatment to promote biogas production. Therefore, simpler and less energy intensive in situ anaerobic digester treatment with enzymes is desirable. However, investigations in which exogenous enzymes are added to treat the material in situ have shown mixed success, possibly because the enzymes used originated from organisms not evolutionarily adapted to the environment of anaerobic digesters. In this study, to examine the effect of enzymes endogenous to methanogenic microbial communities, cellulolytic enzymes were instead overproduced and collected from a dedicated methanogenic microbial community. By this approach, a solution with very high endogenous microbial cellulolytic activity was produced and tested for the effect on biogas production from lignocellulose by in situ anaerobic digester treatment. Results: Addition of enzymes, endogenous to the environment of a mixed methanogenic microbial community, to the anaerobic digestion of ensiled forage ley resulted in significantly increased rate and yield of biomethane production. The enzyme solution had an instant effect on more readily available cellulosic material. More importantly, the induced enzyme solution also affected the biogas production rate from less accessible cellulosic material in a second slower phase of lignocellulose digestion. Notably, this effect was maintained throughout the experiment to completely digested lignocellulosic substrate. Conclusions: The induced enzyme solution collected from a microbial methanogenic community contained enzymes that were apparently active and stable in the environment of anaerobic digestion. The enzymatic activity had a profound effect on the biogas production rate and yield, comparable with the results of many pretreatment methods. Thus, application of such enzymes could enable efficient low energy in situ anaerobic digester treatment for increased biomethane production from lignocellulosic material.

Background: Hitherto, the main goal of metaproteomic analyses has been to characterize the functional role of particular microorganisms in the microbial ecology of various microbial communities. Recently, it has been suggested that metaproteomics could be used for bioprospecting microbial communities to query for the most active enzymes to improve the selection process of industrially relevant enzymes. In the present study, to reduce the complexity of metaproteomic samples for targeted bioprospecting of novel enzymes, a microbial community capable of producing cellulases was maintained on a chemically defined medium in an enzyme suppressed metabolic steady state. From this state, it was possible to specifically and distinctively induce the desired cellulolytic activity. The extracellular fraction of the protein complement of the induced sample could thereby be purified and compared to a non-induced sample of the same community by differential gel electrophoresis to discriminate between constitutively expressed proteins and proteins upregulated in response to the inducing substance. Results: Using the applied approach, downstream analysis by mass spectrometry could be limited to only proteins recognized as upregulated in the cellulase-induced sample. Of 39 selected proteins, the majority were found to be linked to the need to degrade, take up, and metabolize cellulose. In addition, 28 (72%) of the proteins were non-cytosolic and 17 (44%) were annotated as carbohydrate-active enzymes. The results demonstrated both the applicability of the proposed approach for identifying extracellular proteins and guiding the selection of proteins toward those specifically upregulated and targeted by the enzyme inducing substance. Further, because identification of interesting proteins was based on the regulation of enzyme expression in response to a need to hydrolyze and utilize a specific substance, other unexpected enzyme activities were able to be identified. Conclusions: The described approach created the conditions necessary to be able to select relevant extracellular enzymes that were extracted from the enzyme-induced microbial community. However, for the purpose of bioprospecting for enzymes to clone, produce, and characterize for practical applications, it was concluded that identification against public databases was not sufficient to identify the correct gene or protein sequence for cloning of the identified novel enzymes.

As an alternative to energy intensive physical methods, enzymatic treatment of sludge produced at wastewater treatment plants for increased hydrolysis and biogas production was investigated. Several hydrolytic enzymes were assessed with a focus on how enzyme activity and life time was influenced by sludge environments. It could be concluded that the activity life time of added enzymes was limited (amp;lt;24 h) in both waste activated sludge and anaerobic digester sludge environments and that this was, for the majority of enzymes, due to endogenous protease activity. In biogas in situ experiments, subtilisin at a 1% mixture on basis of volatile solids, was the only enzyme providing a significantly increased biomethane production of 37%. However, even at this high concentration, subtilisin could not hydrolyze all available substrate within the life time of the enzyme. Thus, for large scale implementation, enzymes better suited to the sludge environments are needed. (C) 2016 Elsevier Ltd. All rights reserved.

Novel enzymes that are stable in diverse conditions are intensively sought because they offer major potential advantages in industrial biotechnology, and microorganisms in extreme environments are key sources of such enzymes. However, most potentially valuable enzymes are currently inaccessible due to the pure culturing problem of microorganisms. Novel metagenomic and metaproteomic techniques that circumvent the need for pure cultures have theoretically provided possibilities to identify all genes and all proteins in microbial communities, but these techniques have not been widely used to directly identify specific enzymes because they generate vast amounts of extraneous data. In a first step towards developing a metaproteomic approach to pinpoint targeted extracellular hydrolytic enzymes of choice in microbial communities, we have generated and analyzed the necessary conditions for such an approach by the use of a methanogenic microbial community maintained on a chemically defined medium. The results show that a metabolic steady state of the microbial community could be reached, at which the expression of the targeted hydrolytic enzymes were suppressed, and that upon enzyme induction a distinct increase in the targeted enzyme expression was obtained. Furthermore, no cross talk in expression was detected between the two focal types of enzyme activities under their respective inductive conditions. Thus, the described approach should be useful to generate ideal samples, collected before and after selective induction, in controlled microbial communities to clearly discriminate between constituently expressed proteins and extracellular hydrolytic enzymes that are specifically induced, thereby reducing the analysis to only those proteins that are distinctively up-regulated.

Biogas Research Center (BRC) är ett kompetenscentrum för biogasforskning som finansieras av Energimyndigheten, LiU och ett flertal externa organisationer med en tredjedel vardera. BRC har en mycket bred tvärvetenskaplig inriktning och sammanför biogasrelaterad kompetens från flera olika områden för att skapa interaktion på flera olika plan:

• mellan näringsliv, akademi och samhälle,
• mellan olika perspektiv, samt
• mellan olika discipliner och kompetensområden.

BRC:s vision är:

Resurseffektiva biogaslösningar finns genomförda i många nya tillämpningar och bidrar till en mer hållbar energiförsörjning, förbättrat miljötillstånd och goda affärer.

BRC:s särskilda roll för att uppnå denna vision är att bidra med kunskapsförsörjning och process-/teknikutveckling för att facilitera utveckling, innovation och implementering av biogaslösningar. Resurseffektivitet är ett nyckelord, vilket handlar om att förbättra befintliga processer och system samt utveckla biogaslösningar i nya sektorer och möjliggöra användning av nya substrat.

For BRC:s etapp 1, den första tvåårsperioden mellan 2012-2014, var forskningsprojekten organiserade enligt tabellen nedan. Den visar viktiga utmaningar för biogasproducenter och andra intressenter, samt hur dessa ”angreps” med åtta forskningsprojekt. Fem av projekten var av explorativ karaktär i bemärkelsen att de var bredare och mer framtidsorienterade - exempelvis utvärderade flera möjliga tekniska utvecklingsmöjligheter (EP1-5). Tre projekt hade ett tydligare fokus på teknik- och processutveckling (DP6-8).

I den här slutrapporten ges en kortfattad bakgrundsbeskrivning och det finns en introduktion till vad den här typen av kompetenscentrum innebär generellt. Därefter finns mer detaljerad information om BRC, exempelvis gäller det centrumets etablering, relevans, vision, hörnstenar och utveckling. De deltagande organisationerna presenteras, både forskargrupperna vid Linköpings universitet och partners och medlemmar. Vidare finns en mer utförlig introduktion till och beskrivning av utmaningarna i tabellen och kortfattat information om forskningsprojekten, följt av ett kapitel som berör måluppfyllelse och den externa utvärdering som gjorts av BRC:s verksamhet. Detaljerad, listad information finns till stor del i bilagorna.

Kortfattat kan det konstateras att måluppfyllelsen överlag är god. Det är speciellt positivt att så många vetenskapliga artiklar publicerats (eller är på gång att publiceras) kopplat till forskningsprojekten och även i det vidare centrumperspektivet. Helt klart förekommer en omfattande verksamhet inom och kopplat till BRC. I etapp 2 är det viktigt att öka andelen mycket nöjda partner och medlemmar, där nu hälften är nöjda och hälften mycket nöjda. Det handlar framför allt om stärkt kommunikation, interaktion och projektledning. Under 2015 förväntas åtminstone två doktorsexamina, där avhandlingarna har stor koppling till forskningen inom etapp 1.

I början på år 2014 skedde en extern utvärdering av verksamheten vid BRC med huvudsyftet att bedöma hur väl centrumet lyckats med etableringen samt att granska om det fanns förutsättningar för framtida framgångsrik verksamhet. Generellt var utfallet mycket positivt och utvärderarna konstaterade att BRC på kort tid lyckats etablera en verksamhet som fungerar väl och engagerar det stora flertalet deltagande aktörer, inom relevanta områden och där de flesta involverade ser BRC som en befogad och väl fungerande satsning, som de har för avsikt att även fortsättningsvis stödja. Utvärderingen bidrog också med flera relevant tips och till att belysa utmaningar.

Utöver denna slutrapport finns separata publikationer från forskningsprojekten.

Arbetet som presenteras i rapporten har finansierats av Energimyndigheten och de medverkande organisationerna.

The identification of novel enzymes for use in industrial biotechnology is an important goal in enzyme discovery. Most industrially relevant enzymes to date have been isolated from pure cultured microorganisms. For future discovery of novel enzymes this is however a major bottleneck since it is well established that only a small fraction of all microorganisms can be obtained in pure cultures. The possibility to identify enzymes directly from complete microbial communities would therefore give access to a huge number of novel enzyme candidates.

Metaproteomics has hitherto mainly been used to understand ecosystem functions. We have instead used the dynamics of proteomics to develop a method based on “induced differential metaproteomics”, by which a desired enzyme activity is induced in a full microbial population and compared to a non-induced reference of the very same population. In a first example the goal was to induce, select and identify cellulases from a thermophilic methanogenic community.

Out of several hundred detectable proteins in a 2D-DIGE experiment, 24 proteins could be identified as at least two-fold up-regulated upon induction. For some proteins spots, the cellulolytic activity was further validated by activity staining using 2D-zymography. Mass spectrometry analysis revealed that 21 out of the 24 up-regulated proteins are cellulases or associated to cellulolytic activity giving a remarkable hit-rate of 88%. This demonstrates the high efficiency and precision of the method, by which a much wider span of the microbial world can be scanned for novel and targeted enzymes.

The identification of novel enzymes for use in industrial biotechnology is an important goal in enzyme discovery. The need for novel biocatalysts for sustainable and efficient bioenergy production and the development of new biomaterials especially gives rise to new strategic opportunities of proteomic research. Most industrially relevant enzymes to date have been isolated from pure cultured microorganisms. It is however well established that only a small fraction of all existing microorganisms can be obtained in pure cultures, thus limiting the potential of finding novel enzymes. The possibility to identify valuable enzymes directly from complete microbial communities would therefore potentially give access to a huge number of novel enzyme candidates.

Metaproteomics, or “the large-scale characterization of the entire protein complement of environmental microbiota at a given point in time” has hitherto mainly been used to understand ecosystem function. In order to reach our goals we have instead used the dynamics of metaproteomics to develop a method based on “induced differential metaproteomics”, in which a desired enzyme activity is induced in a microbial population and compared to a non-induced reference of the very same population. In a first example the goal was to induce, select and identify cellulases from a methanogenic community, maintained in a biogas reactor at a metabolic steady-state in a chemically defined medium.

Two aliquots were subtracted from the reactor, of which one was treated to induce cellulase activity. At the peak of cellulase activity and biogas production in the induced sample, proteins from the liquid phase of the two samples were prepared for 2D-DIGE of the extra-cellular proteins. Out of several hundred protein spots generated by the microbial community and visible in the 2D-DIGE experiment, 95 could be identified as up-regulated in the induced sample by image analysis, as compared to the references (thus representing potential cellulases). In-gel digestion and tandem mass-spectrometry of located and selected up-regulated proteins revealed that 18 out of 30 proteins could be assigned as cellulases or associated to cellulolytic activity giving a remarkable hit-rate of 60 % and thus demonstrating the feasibility of the approach.

These cellulases found can be expected to be highly active and stable at the conditions in which they are naturally produced (pH, temp., salinity etc.). A strategic objective of research, both in academia and in thebiotechnology industry, is to identify novel, highly active microbial enzymes that are stable at the different conditions of various industrial applications. Thus, one of our future prospects includes to further employ the described methodology to identify novel enzymes from microbial communities originating from more extreme environments.

Protein and fat rich slaughterhouse waste is a very attractive waste stream for the production of biogas because of the high biochemical methane potential of the substrate. The material has however some drawbacks as the sole material for biogas production due to the production of several process disturbing metabolites such as ammonia, sulfides and long chain fatty acids. We can in this work present results that show that zeolites have the potential to relieve inhibitory stress from the presence of long chain fatty acids. Moreover, the results strongly indicate that it is mainly acetic acid consumers that are most negatively affected by long chain fatty acids and that the mechanism of stress relief is an adsorption of long chain fatty acids to the zeolites. In addition to this, it is shown that the effect is immediate and that only a small amount of zeolites is necessary to cancel the inhibitory effect of long chain fatty acids.

A common way to store digestate from anaerobic digesters is in open air lagoons. The aim of this study was to investigate whether cooling of digestate before transfer to the storage prevents methane production. Furthermore, if methanogenesis is not prevented, to determine the potential maximum methane slip from an open air lagoon, supplied with heat exchanged digestate from a mesophilic co-digestion plant such as Linköping biogas plant. Results indicate that methane production is not terminated by cooling and that a high methane production can occur in open air lagoons if the conditions are advantageous. Furthermore, the results suggest that it can be worthwhile, from both an economical and an environmental point, to replace open air lagoons with closed post-digesting units. At 25 oC, the methane slip from an open air lagoon could reach as high as 2.6% of the total methane production of a biogas plant, even when the volume of the open air lagoon is only one third of the digesters volume. The combination of low additional cost of production, with significant decrease in release of green house gases to the atmosphere, makes the implementation of post-digestion units at larger biogas plants attractive.

At Tekniska Verken in Linköping AB (TVAB) there is a long time experience of handling and producing biogas from large volumes of slaughterhouse waste. Experiences from research and development and plant operations have lead to the implementation of several process improving technological/biological solutions. We can in this paper describe how the improvements have had several positive effects on the process, including energy savings, better odor control, higher gas quality, increased organic loading rates and higher biogas production with maintained process stability. In addition, it is described how much of the process stability in anaerobic digestion of slaughter house waste relates to the plant operation, which allow the microbiological consortia to adapt to the substrate. Since digestion of proteinaceous substrates like slaughterhouse waste lead to high ammonia loads, special requirements in ammonia tolerance are placed on the microbiota of the anaerobic digestion. Biochemical assays revealed that the main route for methane production proceed through syntrophic acetate oxidation, which require longer retention times than methane production by acetoclastic methanogens. Thus, the long retention time of the plant, accomplished by a low dilution of the substrate, is a vital component of the process stability when treating high protein substrates like slaughterhouse waste.

The single-domain cyclophilin 18 (Cyp18) has long been known to function as a peptidyl-prolyl cis/trans isomerase (PPI) and was proposed by us to also function as a chaperone [Freskgård, P.-O., Bergenhem, N., Jonsson, B.-H., Svensson, M., and Carlsson, U. (1992) Science 258, 466−468]. Later several multidomain PPIs were demonstrated to work as both a peptidyl-prolyl cis/trans isomerase and a chaperone. However, the chaperone ability of Cyp18 has been debated. In this work, we add additional results that show that Cyp18 can both accelerate the rate of refolding and increase the yield of native protein during the folding reaction, i.e., function as both a folding catalyst and a chaperone. Refolding experiments were performed using severely destabilized mutants of human carbonic anhydrase II under conditions where the unfolding reaction is significant and a larger fraction of a more destabilized variant populates molten globule-like intermediates during refolding. A correlation of native state protein stability of the substrate protein versus Cyp18 chaperone activity was demonstrated. The induced correction of misfolded conformations by Cyp18 likely functions through rescue from misfolding of transient molten globule intermediates. ANS binding data suggest that the interaction by Cyp18 leads to an early stage condensation of accessible hydrophobic portions of the misfolding-prone protein substrate during folding. The opposite effect was observed for GroEL known as an unfoldase at early stages of refolding. The chaperone effect of Cyp18 was also demonstrated for citrate synthase, suggesting a general chaperone effect of this PPI.

Magnetite particles were used in a semi-continuous process as magnetic biomass carriers to separate and re-introduce microorganisms in a CSTR reactor. In comparison to a control reactor the methane content during the semi-continuous process was elevated when magnetite particles were used. The difference was most apparent during the fermentative step directly after feeding and upon direct spiking with volatile fatty acids. Total DNA quantification of the separated magnetite particles revealed high association of microorganisms. Furthermore, quantitative real-time PCR analysis of the associated microbial consortia indicated that the hydrogenotrophic Methanobacteriales was overrepresented at the particle surface. Thus, the increased methane production could be coupled to both the crowding and shorter interspecies distances between the groups involved in anaerobic digestion, as well as a preferential adsorption of hydrogenotrophs. By bringing the hydrogenotrophs closer to the primary fermentative bacteria and increasing their relative number the produced hydrogen during acidogenesis is more effectively utilized and more carbon dioxide is converted to methane. Furthermore, by the same cause, the rate of acetogenesis increased as the hydrogenotrophs more effectively could consume the hydrogen produced and thereby keep the hydrogen partial pressure low.

SUMMARY: This study evaluates the effects of addition of the natural zeolite clinoptilolite to anaerobic digesters treating different materials in both batch and continuous lab-scale setups. Zeolite addition to a CSTR with high ammonium levels (5 g NH4+/L) was performed with the purpose to investigate the effects on the amount of free ammonium. We also investigated non ammonium related effects of zeolite addition in dosage between 0-10 g zeolite/L to distinguish any beneficial properties effects. The concentration that was found to be most suitable for slaughterhouse waste (5 g zeolite/L) was subsequently tested and compared in batch conditions for slaughterhouse waste, thin stillage from ethanol production and sewage sludge. Batch experiments with slaughterhouse waste with 5 g zeolite/L significantly decreased the lag phase and in effect increased the degradation rate; no similar effect could be identified for the other substrates tested. We suggest that the increase of degradation rate when adding zeolites in low concentrations is unrelated to the ammonium reduction caused by the zeolite.

The basis for the stability of thermophilic proteins is of fundamental interest for extremophile biology. We investigated the folding and unfolding processes of the homotetrameric Thermoanaerobacter brockii alcohol dehydrogenase (TBADH). TBADH subunits were 4.8 kcal/mol less stable towards guanidinium chloride (GdmCl) unfolding compared to urea, indicating ionic modulation of TBADH stability. Strongly denaturing conditions promoted mono-exponential unfolding kinetics with linear dependence on denaturant concentration. Here TBADH unfolded >40-fold slower when extrapolated from urea as compared to GdmCl unfolding. A marked unfolding hysteresis was shown when comparing refolding and unfolding in urea. An unusual biphasic unfolding trajectory with an exceptionally slow phase at intermediate concentrations of GdmCl and urea was also observed. We advocate that TBADH forms two distinctly different tetrameric isoforms, and likely an ensemble of native states. This unusual supramolecular folding behavior has been shown responsible for formation of amyloidotic yeast prion strains and can have functional importance for TBADH. © 2008 Birkhaueser.

Protein adsorption has large implications in a variety of fields and can be both a problem and an asset. Most often protein adsorption is accompanied by structural changes in the adsorbed protein. The degree and rate of these changes are dependent on the surface, conditions during adsorption and experimental set up as well as of intrinsic properties of the protein. The effect of conformational changes influences both practical applications and experimental results in studies of protein adsorption at the liquid/solid interface. The intrinsic property of the protein that is most instrumental for conformational changes upon adsorption is the stability of the protein. Hence, large efforts have been directed towards analysis of how both the nature of surfaces and conditions influence the stability of proteins upon adsorption. Less work has been focused on the reversed view, i.e. how the stability of proteins influences adsorption, the rate and degree of the subsequent conformational changes as well as the effects of these changes. However, the increasing use of proteins in a variety of medical and biotechnological applications requires a deeper knowledge of the importance and effects of stabilizing interactions in the protein structure. Engineered stabilized proteins that are less affected by surface interactions should be of potential use for various practical purposes.

The engineered disulfide bridge A23C/L203C in human carbonic anhydrase II, inserted from homology modeling of Neisseria gonorrhoeae carbonic anhydrase, significantly stabilizes the native state of the protein. The inserted cysteine residues are placed in the interior of the structure, and because of the conformationally restrained localization, the protein is expressed in the reduced state and the cysteines are not readily oxidized. However, upon exposure to low concentrations of denaturant (0.6 M guanidine hydrochloride), corresponding to the lower part of the denaturation curve for the first unfolding transition, the oxidation rate of correctly formed disulfide bridges was markedly increased. By entropy estimations it appears that the increased flexibility, induced by the denaturant, enables the cysteines to find each other and hence to form the disulfide bridge. The outlined strategy of facilitating formation of disulfide bonds by addition of adjusted concentrations of a denaturant should be applicable to other proteins in which engineered cysteine residues are located in nonideal conformations. Moreover, a S99C/V242C variant was constructed, in which the cysteine residues are located on the surface. In this mutant the disulfide bridge was spontaneously formed and the native state was considerably stabilized (midpoint concentration of unfolding was increased from 1.0 to 1.4 M guanidine hydrochloride).

Little is known about the direction and specificity of protein adsorption to solid surfaces, a knowledge that is of great importance in many biotechnological applications. To resolve the direction in which a protein with known structure and surface potentials binds to negatively charged silica nanoparticles, fluorescent probes were attached to different areas on the surface of the protein human carbonic anhydrase II. By this approach it was clearly demonstrated that the adsorption of the native protein is specific to limited regions at the surface of the N-terminal domain of the protein. Furthermore, the adsorption direction is strongly pH-dependent. At pH 6.3, a histidine-rich area around position 10 is the dominating adsorption region. At higher pH values, when the histidines in this area are deprotonated, the protein is also adsorbed by a region close to position 37, which contains several lysines and arginines. Clearly the adsorption is directed by positively charged areas on the protein surface toward the negatively charged silica surface at conditions when specific binding occurs.

The subject of this thesis can be split into two parts, one that is dealing with the stability and stabilization of proteins on its own merits and a second part that deals with the protein adsorption orientation on solid surfaces and how the stability of a protein influences the behavior at a solid/liquid interface. Thus, the common denominator and focus have been on protein stability. Molecular modeling and site-directed mutagenesis tools have been used to engineer a protein, human carbonic anhydrase II (HCA II), for these studies. The effects of these mutations on stability and surface interactions have then been studied by biophysical methods.

Stabilization of HCA II by an engineered disulfide bridge: To find a way to stabilize the enzyme HCA II, homology modeling against the related and unusually stable carbonic anhydrase from Neisseria gonorrhoeae (NGCA) was performed. We were able to successfully utilize the homology modeling to graft a disulfide bridge from NGCA into the human enzyme. The disulfide bond was not formed spontaneously, but would only form after a prolonged exposure to oxidizing agents. However, formation of the disulfide bridge led to a dramatic stabilization of the native conformation.

Accelerated formation of the disulfide bridge: It was found that it is the conformationally restrained localization of the introduced cysteines that is the reason that the protein is expressed in the reduced state and is not readily oxidized. However, upon exposure to low concentrations of denaturant, corresponding to the lower part of the denaturation curve for the first unfolding transition of the reduced state, there was a striking increase of the oxidation rate of correctly formed disulfide bridges. This provides a method for creating the oxidized disulfide variant of proteins, with engineered cysteines in the interior of proteins, which would otherwise not be formed within an acceptable time span.

Refolding studies of stabilized variant of HCA II: The stabilized protein underwent, contrary to all other investigated variants of HCA II, an apparent two-state unfolding transition with suppression of the otherwise stable equilibrium. molten-globule intermediate, which normally is very prone to aggregation. Stopped-flow measurements also showed that the population of the transiently occurring molten globule was suppressed during refolding. This circumnavigation of misfolding traps and intermediates led to a markedly lowered tendency for aggregation and to significantly higher reactivation yields upon refolding of the fully denatured protein.

Correlation between protein stability and surface induced denaturation: Negatively charged silica nanoparticles were used in order to determine the influence of protein stability on the denaturation rate upon adsorption. Various destabilized mutants were produced by site-directed mutagenesis of amino acids located in the interior of the protein. The silica nanoparticles induced a molten globule-like state in all of the variants. All protein variants initially adsorbed to the particles, and subsequently underwent conformational rearrangements in a stepwise manner. This study also showed that a decrease in the global stability of the protein is strongly correlated to increased rates of conformational change upon adsorption to the surface.

Determination of protein adsorption orientation: By site-directed labeling fluorescent probes were specifically introduced on the surface of HCA II and it was shown, for the first time, that it is possible to specifically determine the orientation of an adsorbed protein in the native state to a surface (silica nanoparticles). By this approach it was possible to clearly demonstrate that the adsorption of the native protein is specific to limited regions at the surface of the N-terminal domain of the protein and, furthermore, that the adsorption direction is strongly pH-dependent.

Reduction of irreversible protein adsorption by protein stabilization: The strong correlation between decreased stability and increased rates of conformational changes of the protein upon adsorption to surfaces initiated yet another surface study. Three variants of HCA IT with lower, the same, and higher stability than the wild-type protein were monitored by surface plasmon resonance upon adsorption to and desorption from surfaces with fundamentally different properties. Regardless of the nature of the surface there were correlations between (i) the protein stability and kinetics of adsorption with an increased amplitude of the first kinetic phase of adsorption with increasing stability; (ii) the protein stability and the extent of maximally adsorbed protein to the actual surface, with an increased amount of adsorbed protein with increasing stability; (iii) the protein stability and the amount of protein desorbed upon washing with buffer, with an increased elutability of the adsorbed protein with increased stability, demonstrating that protein engineering for increased stability can be used to reduce irreversible protein adsorption.

To characterize the sites on the protein surface that are involved in the adsorption to silica nanoparticles and the subsequent rearrangements of the protein/nanoparticle interaction, a novel approach has been used. After incubation of protein with silica nanoparticles for 2 or 16 h, the protein was cleaved with trypsin and the peptide fragments were analyzed with mass spectrometry. The nanoparticle surface area was in 16-fold excess over available protein surface to minimize the probability that the initial binding would be affected by other protein molecules. When the fragment patterns obtained in the presence and absence of silica nanoparticles were compared, we were able to characterize the protein fragments that interact with the surface. This approach has allowed us to identify the initial binding sites on the protein structure and the rearrangement of the binding sites that occur upon prolonged incubation with the surface.

The influence of protein stability on the adsorption and desorption behavior to surfaces with fundamentally different properties (negatively charged, positively charged, hydrophilic, and hydrophobic) was examined by surface plasmon resonance measurements. Three engineered variants of human carbonic anhydrase II were used that have unchanged surface properties but large differences in stability. The orientation and conformational state of the adsorbed protein could be elucidated by taking all of the following properties of the protein variants into account: stability, unfolding, adsorption, and desorption behavior. Regardless of the nature of the surface, there were correlation between (i) the protein stability and kinetics of adsorption, with an increased amplitude of the first kinetic phase of adsorption with increasing stability; (ii) the protein stability and the extent of maximally adsorbed protein to the actual surface, with an increased amount of adsorbed protein with increasing stability; (iii) the protein stability and the amount of protein desorbed upon washing with buffer, with an increased elutability of the adsorbed protein with increased stability. All of the above correlations could be explained by the rate of denaturation and the conformational state of the adsorbed protein. In conclusion, protein engineering for increased stability can be used as a strategy to decrease irreversible adsorption on surfaces at a liquid-solid interface.

The native state of the enzyme human carbonic anhydrase (HCA II) has been stabilized by the introduction of a disulfide bond, the oxidized A23C/L203C mutant. This stabilized protein variant undergoes an apparent two-state unfolding process with suppression of the otherwise stable equilibrium, molten-globule intermediate, which is normally very prone to aggregation. Stopped-flow measurements also showed that lower amounts of the transiently occurring molten globule were formed during refolding. This led to a markedly lowered tendency for aggregation during equilibrium denaturing conditions and, more importantly, to significantly higher reactivation yields upon refolding of the fully denatured protein. Thus, a general strategy to circumvent aggregation during the refolding of proteins could be to stabilize the native state of a protein at the expense of partially folded intermediates, thereby shifting the unfolding behavior from a three-state process to a two-state one.

Staphylococcal protein A (SPA) is a cell surface protein expressed by Staphylococcus aureus. It consists of five repetitive domains. The five SPA-domains show individual interaction to the Fc-fragment as well as certain Fab-fragments of immunoglobulin G (IgG) from most mammalian species. Due to the high affinity and selectivity of SPA, it has a widespread use as an affinity ligand for capture and purification of antibodies. One of the problems with proteinaceous affinity ligands in large-scale purification is their sensitivity to alkaline conditions. SPA however, is considered relatively stable to alkaline treatment. Nevertheless, it is desirable to further improve the stability in order to enable an SPA-based affinity medium to withstand even longer exposure to the harsh conditions associated with cleaning-in-place (CIP) procedures. For this purpose, a protein engineering strategy, which was used earlier for stabilization and consists of replacing the asparagine residues, is employed. Since Z in its "nonengineered" form already has a significant tolerance to alkaline treatment, small changes in stability due to the mutations are difficult to assess. Hence, in order to enable detection of improvements regarding the alkaline resistance of the Z domain, we chose to use a bypass mutagenesis strategy using a mutated variant Z(F30A) as a surrogate framework. Z(F30A) has earlier been shown to possess an affinity to IgG that is similar to the wild-type but also demonstrates decreased structural stability. Since the contribution of the different asparagine residues to the deactivation rate of a ligand is dependent on the environment and also the structural flexibility of the particular region, it is important to consider all sensitive amino acids one by one. The parental Z-domain contains eight asparagine residues, each with a different impact on the alkaline stability of the domain. By exchanging asparagine 23 for a threonine, we were able to increase the stability of the Z(F30A) domain in alkaline conditions. Also, when grafting the N23T mutation to the Z scaffold, we were able to detect an increased tolerance to alkaline treatment compared to the native Z molecule. © 2004 Wiley-Liss, Inc.

Most loss-of-function diseases are caused by aberrant folding of important proteins. These proteins often misfold due to mutations. The disease marble brain syndrome (MBS), known also as carbonic anhydrase II deficiency syndrome (CADS), can manifest in carriers of point mutations in the human carbonic anhydrase II (HCA II) gene. One mutation associated with MBS entails the His107Tyr substitution. Here, we demonstrate that this mutation is a remarkably destabilizing folding mutation. The loss-of-function is clearly a folding defect, since the mutant shows 64% of CO₂ hydration activity compared to that of the wild-type at low temperature where the mutant is folded. On the contrary, its stability towards thermal and guanidine hydrochloride (GuHCl) denaturation is highly compromised. Using activity assays, CD, fluorescence, NMR, cross-linking, aggregation measurements and molecular modeling, we have mapped the properties of this remarkable mutant. Loss of enzymatic activity had a midpoint temperature of denaturation (T_m) of 16 °C for the mutant compared to 55 °C for the wild-type protein. GuHCl-denaturation (at 4 °C) showed that the native state of the mutant was destabilized by 9.2 kcal/mol. The mutant unfolds through at least two equilibrium intermediates; one novel intermediate that we have termed the molten globule light state and, after further denaturation, the classical molten globule state is populated. Under physiological conditions (neutral pH; 37 °C), the His107Tyr mutant will populate the molten globule light state, likely due to novel interactions between Tyr107 and the surroundings of the critical residue Ser29 that destabilize the native conformation. This intermediate binds the hydrophobic dye 8-anilino-1-naphthalene sulfonic acid (ANS) but not as strong as the molten globule state, and near-UV CD reveals the presence of significant tertiary structure. Notably, this intermediate is not as prone to aggregation as the classical molten globule. As a proof of concept for an intervention strategy with small molecules, we showed that binding of the CA inhibitor acetazolamide increases the stability of the native state of the mutant by 2.9 kcal/mol in accordance with its strong affinity. Acetazolamide shifts the T_m to 34 °C that protects from misfolding and will enable a substantial fraction of the enzyme pool to survive physiological conditions.

To find a disulfide pair that could stabilize the enzyme human carbonic anhydrase II (HCA II), we grafted the disulfide bridge from the related and unusually stable carbonic anhydrase form from Neisseria gonorrhoeae (NGCA) into the human enzyme. Thus, the two Cys residues at positions 23 and 203 were engineered into a pseudo-wild-type form of HCA II (C206S), giving the mutant C206S/A23C/L203C. The disulfide bond was not formed spontaneously. The native state of the reduced form of the mutant was markedly destabilized (2.9 kcal/mol) compared to that of HCA II. Formation of a disulfide bridge was achieved by treatment by oxidized glutathione. This led to a significant stabilization of the native conformation. Compared to HCA II the unfolding midpoint for the variant was increased from 0.9 to 1.7 M guanidine HCl, corresponding to a stabilization of 3.7 kcal/mol. This makes the human enzyme almost as stable as the model protein NGCA, for which the unfolding of the native state has a midpoint at 2.1 M guanidine HCl. The stabilized protein underwent, contrary to all other investigated variants of HCA II, an apparent two-state unfolding transition, as judged from intrinsic Trp fluorescence measurements. A molten−globule intermediate is nevertheless formed but is suppressed because of the high denaturant pressure it faces upon rupture of the native state.

The development of commercial biosensors based on surface plasmon resonance has made possible careful characterization of biomolecular interactions. Here, a set of destabilized human carbonic anhydrase II (HCA II) mutants was investigated with respect to their interaction kinetics with two different immobilized benzenesulfonamide inhibitors. Point mutations were located distantly from the active site, and the destabilization energies were up to 23 kJ/mol. The dissociation rate of wild-type HCA II, as determined from the binding to the inhibitor with higher affinity, was 0.019 s⁻¹. For the mutants, dissociation rates were faster (0.022–0.025 s⁻¹), and a correlation between faster dissociation and a high degree of destabilization was observed. We interpreted these results in terms of increased dynamics of the tertiary structures of the mutants. This interpretation was supported by entropy determinations, showing that the entropy of the native structure significantly increased upon destabilization of the protein molecule. Our findings demonstrate the applicability of modern biosensor technology in the study of subtle details in molecular interaction mechanisms, such as the long-range effect of point mutations on interaction kinetics.

The surface adsorption behavior of protein variants of the enzyme human carbonic anhydrase II (HCA II) to silica nanoparticles has been investigated. Various destabilized mutants were produced by site-directed mutagenesis of amino acids located in the interior of the protein. The silica particles induced a molten-globule-like state in all of the variants. All protein variants initially adsorbed to the particles, and then underwent conformational rearrangements in a stepwise manner, as indicated by the loss of activity and the subsequent loss of tertiary structure. Activity, CD, and ANS fluorescence measurements showed that a decrease in the global stability of the protein is strongly correlated to increased rates of conformational change following particle adsorption. In contrast to unfolding processes induced by chemical denaturants or heat, in the transition to the molten-globule-like state induced by the silica particles, the active site region unfolds before the majority of the tertiary interactions are broken.