Exciton transfer between two parallel GaAs V-groove quantum wires (QWRs) or two planar quantum wells (QWs) separated by AlGaAs barriers ranging from 5.5 nm to 20 nm thickness is studied by photoluminescence (PL) and PL excitation (PLE) spectroscopy. It is found that the transfer is strongly reduced between the widely spaced QWRs as compared with QWs. We have also investigated the optical absorption in single QWRs embedded in an AlGaAs V-shaped channel waveguide. Using a combination of PLE and absorption measurements we construct the full dependence of absorption spectra on the linear polarization. Our studies reveal the importance of inter-subband mixing in determining the energies of the light-hole-like transitions and thus the QWR absorption. Finally we present recent results on the fabrication and structural characterization of GaAs and GaP nanowires (NWs) grown by molecular beam epitaxy (MBE) on GaAs(111)B and Si(111) substrates, using Au-catalyzed vapor–liquid–solid growth technique. It is shown that, apart from optimizing the NW growth parameters, substrate material and the procedure for preparing the substrate before the MBE growth play an important role in controlling the NWs.

Exciton transfer between two parallel GaAs V-groove quantum wires or two planar quantum wells separated by AlGaAs barriers ranging from 5.5 nm to 20 nm thickness is studied by photoluminescence and photoluminescence excitation spectroscopy. It is found that the transfer is strongly reduced between the widely spaced quantum wires as compared with quantum wells. This observation is supported by model calculations, which yield strong dimensionality dependence of the photon-exchange transfer

The observation and the interpretation of line splitting in photoluminescence and cathodoluminescence spectra of GaAs/AlGaAs V-groove quantum wires (QWRs) are reported. The QWR emission line splits into two peaks whose intensities oscillate systematically along the axis of the wire. Combining atomic force microscopy and cathodoluminescence measurements, we show a clear correlation between the surface topography of the V-groove and the individual peak intensities. We elucidate the relationship between the V-groove sidewall roughness and the shape at its bottom, and explain their impact on the QWR formation using a two-dimensional growth model accounting for self-limited growth in each V-groove domain. The influence of the long-range substrate roughness on the QWR spectral features is thus clarified. The study provides guidelines for improving QWR uniformity in order to achieve near-ideal model systems for one-dimensional semiconductors

Optical transitions associated with all three linear polarization directions were investigated in single GaAs V-groove quantum wires of different wire thicknesses. This was accomplished by combining absorption measurements in V-groove waveguide geometry with surface-excited photoluminescence excitation spectroscopy. The observed transitions were identified with the aid of model calculations. It is shown that excitonic intersubband coupling should be accounted for in order to explain the optical transitions associated with confined light-hole-like states. The results are relevant for the design of efficient quantum wire waveguide modulators and lasers.