Organic luminescent materials that exhibit thermally activated delayed fluorescence (TADF) can convert non-emissive triplet excitons into emissive singlet states through a reverse intersystem crossing (RISC) process. Therefore, they have tremendous potential for applications in organic light-emitting diodes (OLEDs). However, with the development of ultra-high definition 4K/8K display technologies, designing efficient deep-blue TADF materials to achieve the Commission Internationale de l’Éclairage (CIE) coordinates fulfilling BT.2020 remains a significant challenge. Here, an effective approach is proposed to design deep-blue TADF molecules based on hybrid long- and short-range charge-transfer by incorporation of multiple donor moieties into organoboron multiple resonance acceptors. The resulting TADF molecule exhibits deep-blue emission at 414 nm with a full width at half maximum (FWHM) of 29 nm, together with a thousand-fold increase in RISC rate. OLEDs based on the champion material achieve a record maximum external quantum efficiency (EQE) of 22.8% with CIE coordinates of (0.163, 0.046), approaching the coordinates of the BT.2020 blue standard. Moreover, TADF-assisted fluorescence devices employing the designed material as a sensitizer exhibit an exceptional EQE of 33.1%. This work thus provides a blueprint for future development of efficient deep-blue TADF emitters, representing an important milestone towards meeting the blue color gamut standard of BT.2020.

Through the development of new non-fullerene electron acceptor (NFA) materials, such as Y6 and its molecular derivatives, the power conversion efficiencies of organic photovoltaics (OPVs) have now exceeded 19 %. However, despite this rapid progress, our fundamental understanding of the unique optical and electronic properties of these Y-series NFAs is lacking, and this currently limits progress in material design. In this work, we provide a detailed computational-experimental characterisation of the archetypal NFA, Y6. To explain the significant broadening and red shift of the absorption spectrum observed when moving from the solution phase to the solid state, we first rule out more typical causes, such as J-aggregation. Instead, by considering the role of charge transfer (CT) excitations and their mixing with Frenkel exciton (FE) states, we can computationally reproduce the experimental absorption spectra of Y6 with excellent accuracy. Using transient absorption spectroscopy, we provide evidence for this dense manifold of FE-CT hybrid electronic excitations in Y6 through the prominent sub-picosecond relaxation events following supra band gap excitation. Furthermore, through sub band gap excitation, we also find states with polaronic character in Y6 that are in a dynamic equilibrium with the FE-CT hybrid states. Magnetic resonance spectroscopies reveal that these polaronic states are polaron pairs, most likely located on neighbouring Y6 molecules, not free charge carriers, as has been previously suggested. Thus, this new understanding of how the solid-state packing motif directly controls the optical and electronic properties of Y-series NFAs opens the door to intelligently design NFA materials to further increase OPV performance. © 2024 The Authors

The poor operational stability of non-fullerene electron acceptor (NFA) organic solar cells (OSCs) currently limits their commercial application. While previous studies have primarily focused on the degradation of the NFA component, we also consider here the electron donor material. We examine the stability of three representative donor polymers, PM6, D18, and PTQ10, paired with the benchmark NFA, Y6. After light soaking PM6 and D18 in air, we find an enhanced conversion of singlet excitons into trapped interchain polaron pairs on sub-100 femtosecond timescales. This process outcompetes electron transfer to Y6, significantly reducing the charge generation yield. However, this pathway is absent in PTQ10. We identify twisting in the benzo[1,2-b:4,5-b′]dithiophene (BDT)-thiophene motif shared by PM6 and D18 as the cause. By contrast, PTQ10 does not contain this structural motif and has improved stability. Thus, we show that the donor polymer can be a weak link for OSC stability, which must be addressed collectively with the NFA.

Non-fullerene acceptors (NFAs) have enabled power conversion efficiencies exceeding 19% in organic solar cells (OSCs). However, the open-circuit voltage of OSCs remains low relative to their optical gap due to excessive non-radiative recombination, and this now limits performance. Here, an important aspect of OSC design is considered, namely management of the triplet exciton population formed after non-geminate charge recombination. By comparing the blends PM6:Y11 and PM6:Y6, it is shown that the greater crystallinity of the NFA domains in PM6:Y11 leads to a higher rate of triplet-triplet annihilation (TTA). This is attributed to the four times larger ground state dipole moment of Y11 versus Y6, which improves the long range NFA out-of-plane ordering. Since TTA converts a fraction of the non-emissive triplet states into bright singlet states, it has the potential to reduce non-radiative voltage losses. Through a kinetic analysis of the recombination processes under 1-Sun illumination, a framework is provided for determining the conditions under which TTA may improve OSC performance. If these could be satisfied, TTA has the potential to reduce non-radiative voltage losses by up to several tens of millivolts.

Thermally activated delayed fluorescence enables organic semiconductors with charge transfer-type excitons to convert dark triplet states into bright singlets via reverse intersystem crossing. However, thus far, the contribution from the dielectric environment has received insufficient attention. Here we study the role of the dielectric environment in a range of thermally activated delayed fluorescence materials with varying changes in dipole moment upon optical excitation. In dipolar emitters, we observe how environmental reorganization after excitation triggers the full charge transfer exciton formation, minimizing the singlet–triplet energy gap, with the emergence of two (reactant-inactive) modes acting as a vibrational fingerprint of the charge transfer product. In contrast, the dielectric environment plays a smaller role in less dipolar materials. The analysis of energy–time trajectories and their free-energy functions reveals that the dielectric environment substantially reduces the activation energy for reverse intersystem crossing in dipolar thermally activated delayed fluorescence emitters, increasing the reverse intersystem crossing rate by three orders of magnitude versus the isolated molecule.

Organic light-emitting diodes (OLEDs) must be engineered to circumvent the efficiency limit imposed by the 3:1 ratio of triplet to singlet exciton formation following electron-hole capture. Here we show the spin nature of luminescent radicals such as TTM-3PCz allows direct energy harvesting from both singlet and triplet excitons through energy transfer, with subsequent rapid and efficient light emission from the doublet excitons. This is demonstrated with a model Thermally-Activated Delayed Fluorescence (TADF) organic semiconductor, 4CzIPN, where reverse intersystem crossing from triplets is characteristically slow (50% emission by 1 µs). The radical:TADF combination shows much faster emission via the doublet channel (80% emission by 100 ns) than the comparable TADF-only system, and sustains higher electroluminescent efficiency with increasing current density than a radical-only device. By unlocking energy transfer channels between singlet, triplet and doublet excitons, further technology opportunities are enabled for optoelectronics using organic radicals.

Molecular organic fluorophores are currently used in organic light-emitting diodes, though non-emissive triplet excitons generated in devices incorporating conventional fluorophores limit the efficiency. This limit can be overcome in materials that have intramolecular charge-transfer excitonic states and associated small singlet-triplet energy separations; triplets can then be converted to emissive singlet excitons resulting in efficient delayed fluorescence. However, the mechanistic details of the spin interconversion have not yet been fully resolved. We report transient electron spin resonance studies that allow direct probing of the spin conversion in a series of delayed fluorescence fluorophores with varying energy gaps between local excitation and charge-transfer triplet states. The observation of distinct triplet signals, unusual in transient electron spin resonance, suggests that multiple triplet states mediate the photophysics for efficient light emission in delayed fluorescence emitters. We reveal that as the energy separation between local excitation and charge-transfer triplet states decreases, spin interconversion changes from a direct, singlet-triplet mechanism to an indirect mechanism involving intermediate states.

Efficient organic emitters in the deep-red region are rare due to the “energy gap law”. Herein, multiple boron (B)- and nitrogen (N)-atoms embedded polycyclic heteroaromatics featuring hybridized π-bonding/ non-bonding molecular orbitals are constructed, providing a way to overcome the above luminescent boundary. The introduction of B-phenyl-B and N-phenyl-N structures enhances the electronic coupling of those para-positioned atoms, forming restricted π-bonds on the phenyl-core for delocalized excited states and thus a narrow energy gap. The mutually ortho-positioned B- and N-atoms also induce a multi-resonance effect on the peripheral skeleton for the non-bonding orbitals, creating shallow potential energy surfaces to eliminate the high-frequency vibrational quenching. The corresponding deep-red emitters with peaks at 662 and 692 nm exhibit narrow full-width at half-maximums of 38 nm, high radiative decay rates of ca. 108 s−1, ≈100 % photo-luminescence quantum yields and record-high maximum external quantum efficiencies of ca. 28 % in a normal planar organic light-emitting diode structure, simultaneously.

Engineering a low singlet-triplet energy gap (Delta E-ST) is necessary for efficient reverse intersystem crossing (rISC) in delayed fluorescence (DF) organic semiconductors but results in a small radiative rate that limits performance in LEDs. Here, we study a model DF material, BF2, that exhibits a strong optical absorption (absorption coefficient = 3.8 x 10(5) cm(-1)) and a relatively large Delta E-ST of 0.2 eV. In isolated BF2 molecules, intramolecular rISC is slow (delayed lifetime = 260 mu s), but in aggregated films, BF2 generates intermolecular charge transfer (inter-CT) states on picosecond timescales. In contrast to the microsecond intramolecular rISC that is promoted by spin-orbit interactions in most isolated DF molecules, photoluminescence-detected magnetic resonance shows that these inter-CT states undergo rISC mediated by hyperfine interactions on a similar to 24 ns timescale and have an average electron-hole separation of >= 1.5 nm. Transfer back to the emissive singlet exciton then enables efficient DF and LED operation. Thus, access to these inter-CT states, which is possible even at low BF2 doping concentrations of 4 wt%, resolves the conflicting requirements of fast radiative emission and low Delta E-ST in organic DF emitters.