The self-induced formation of core-shell InAlN nanorods (NRs) is addressed at the mesoscopic scale by density functional theory (DFT)-resulting parameters to develop phase field modeling (PFM). Accounting for the structural, bonding, and electronic features of immiscible semiconductor systems at the nanometer scale, we advance DFT-based procedures for computation of the parameters necessary for PFM simulation runs, namely, interfacial energies and diffusion coefficients. The developed DFT procedures conform to experimental self-induced InAlN NRs' concerning phase-separation, core/shell interface, morphology, and composition. Finally, we infer the prospects for the transferability of the coupled DFT-PFM simulation approach to a wider range of nanostructured semiconductor materials.

Currently, self-induced InAlN core-shell nanorods enjoy an advanced stage of accumulation of experimental data from their growth and characterization as well as a comprehensive understanding of their formation mechanism by the ab initio modeling based on Synthetic Growth Concept. However, their electronic and optical properties, on which most of their foreseen applications are expected to depend, have not been investigated comprehensively. GW and the Bethe-Salpeter equation (BSE) are regarded as the state-of-the-art ab initio methodologies to study these properties. However, one of the major drawbacks of these methods is the computational cost, much higher than density-functional theory (DFT). Therefore, in many applications, it is highly desirable to answer the question of how well approaches based on DFT, such as e.g. the local density approximation (LDA), LDA-1/2, the modified Becke-Johnson (mBJ) and the Heyd-Scuseria-Ernzerhof (HSE06) functionals, can be employed to calculate electronic and optical properties with reasonable accuracy. In the present paper, we address this question, investigating how effective the DFT-based methodologies LDA, LDA-1/2, mBJ and HSE06 can be used as approximate tools in studies of the electronic and optical properties of scaled down models of core-shell InAlN nanorods, thus, avoiding GW and BSE calculations.

Zinc aluminogallate, Zn(AlxGa1−x)2O4 (ZAGO), a single-phase spinel structure, offers considerable potential for high-performance electronic devices due to its expansive compositional miscibility range between aluminum (Al) and gallium (Ga). Direct growth of high-quality ZAGO epilayers however remains problematic due to the high volatility of zinc (Zn). This work highlights a novel synthesis process for high-quality epitaxial quaternary ZAGO thin films on sapphire substrates, achieved through thermal annealing of a ZnGa2O4 (ZGO) epilayer on sapphire in an ambient air setting. In-situ annealing x-ray diffraction measurements show that the incorporation of Al in the ZGO epilayer commenced at 850 °C. The Al content (x) in ZAGO epilayer gradually increased up to around 0.45 as the annealing temperature was raised to 1100 °C, which was confirmed by transmission electron microscopy (TEM) and energy dispersive x-ray spectroscopy. X-ray rocking curve measurement revealed a small full width at half maximum value of 0.72 °, indicating the crystal quality preservation of the ZAGO epilayer with a high Al content. However, an epitaxial intermediate �–(AlxGa1−x)2O3 layer (� - AGO) was formed between the ZAGO and sapphire substrate. This is believed to be a consequence of the interdiffusion of Al and Ga between the ZGO thin film and sapphire substrate. Using density functional theory, the substitution cost of Ga in sapphire was determined to be about 0.5 eV lower than substitution cost of Al in ZGO. Motivated by this energetically favorable substitution, a formation mechanism of the ZAGO and AGO layers was proposed. Spectroscopic ellipsometry studies revealed an increase in total thickness of the film from 105.07 nm (ZGO) to 147.97 nm (ZAGO/AGO) after annealing to 1100 °C, which were corroborated using TEM. Furthermore, an observed increase in the direct (indirect) optical bandgap from 5.06 eV (4.7 eV) to 5.72 eV (5.45 eV) with an increasing Al content in the ZAGO layer further underpins the formation of a quaternary ZAGO alloy with a tunable composition.

By addressing precursor prevalence and energetics using the DFT-based synthetic growth concept (SGC), the formation mechanism of self-induced InAlN core–shell nanorods (NRs) synthesized by reactive magnetron sputter epitaxy (MSE) is explored. The characteristics of In- and Al-containing precursor species are evaluated considering the thermal conditions at a typical NR growth temperature of around 700 °C. The cohesive and dissociation energies of In-containing precursors are consistently lower than those of their Al-containing counterparts, indicating that In-containing precursors are more weakly bonded and more prone to dissociation. Therefore, In-containing species are expected to exhibit lower abundance in the NR growth environment. At increased growth temperatures, the depletion of In-based precursors is even more pronounced. A distinctive imbalance in the incorporation of Al- and In-containing precursor species (namely, AlN/AlN+, AlN2/AlN2+, Al2N2/Al2N2+, and Al2/Al2+ vs InN/InN+, InN2/InN2+, In2N2/In2N2+, and In2/In2+) is found at the growing edge of the NR side surfaces, which correlates well with the experimentally obtained core–shell structure as well as with the distinctive In-rich core and vice versa for the Al-rich shell. The performed modeling indicates that the formation of the core–shell structure is substantially driven by the precursors’ abundance and their preferential bonding onto the growing edge of the nanoclusters/islands initiated by phase separation from the beginning of the NR growth. The cohesive energies and the band gaps of the NRs show decreasing trends with an increment in the In concentration of the NRs’ core and with an increment in the overall thickness (diameter) of the NRs. These results reveal the energy and electronic reasons behind the limited growth (up to ∼25% of In atoms of all metal atoms, i.e., InxAl1–xN, x ∼ 0.25) in the NR core and may be qualitatively perceived as a limiting factor for the thickness of the grown NRs (typically <50 nm).

Tritantalum pentanitride (Ta₃N₅) semiconductor is a promising material for photoelectrolysis of water with high efficiency. Ta₃N₅ is a metastable phase in the complex system of TaN binary compounds. Growing stabilized single-crystal Ta₃N₅ films is correspondingly challenging. Here, we demonstrate the growth of a nearly single-crystal Ta₃N₅ film with epitaxial domains on c-plane sapphire substrate, Al₂O₃(0001), by magnetron sputter epitaxy. Introduction of a small amount ~2% of O₂ into the reactive sputtering gas mixed with N₂ and Ar facilitates the formation of a Ta₃N₅ phase in the film dominated by metallic TaN. In addition, we indicate that a single-phase polycrystalline Ta₃N₅ film can be obtained with the assistance of a Ta₂O₅ seed layer. With controlling thickness of the seed layer smaller than 10 nm and annealing at 1000 °C, a crystalline β phase Ta₂O₅ was formed, which promotes the domain epitaxial growth of Ta₃N₅ films on Al₂O₃(0001). The mechanism behind the stabilization of the orthorhombic Ta₃N₅ structure resides in its stacking with the ultrathin seed layer of orthorhombic β-Ta₂O₅, which is energetically beneficial and reduces the lattice mismatch with the substrate.

Metal organic chemical vapor deposition (MOCVD) of group III nitrides on graphene heterostructures offers new opportunities for the development of flexible optoelectronic devices and for the stabilization of conceptually-new two-dimensional materials. However, the MOCVD of group III nitrides is regulated by an intricate interplay of gas-phase and surface reactions that are beyond the resolution of experimental techniques. We use density-functional ab initio molecular dynamics (AIMD) with van der Waals corrections to identify atomistic pathways and associated electronic mechanisms driving precursor/surface reactions during metal organic vapor phase epitaxy at elevated temperatures of aluminum nitride on graphene, considered here as model case study. The results presented provide plausible interpretations of atomistic and electronic processes responsible for delivery of Al, C adatoms, and C-Al, CHx, AlNH2 admolecules on pristine graphene via precursor/surface reactions. In addition, the simulations reveal C adatom permeation across defect-free graphene, as well as exchange of C monomers with graphene carbon atoms, for which we obtain rates of approximate to 0.3 THz at typical experimental temperatures (1500 K), and extract activation energies Eexca = 0.28 +/- 0.13 eV and attempt frequencies A(exc) = 2.1 (x1.7(+/- 1)) THz via Arrhenius linear regression. The results demonstrate that AIMD simulations enable understanding complex precursor/surface reaction mechanisms, and thus propose AIMD to become an indispensable routine prediction-tool toward more effective exploitation of chemical precursors and better control of MOCVD processes during synthesis of functional materials.

A new carbon-based compound: CS_xF_y was addressed by density functional theory calculations and synthesized by reactive magnetron sputtering. Geometry optimizations and energy calculations were performed on graphene-like model systems containing sulfur and fluorine atoms. It is shown that [S+F] concentrations in the range of 0−10 at.%, structural ordered characteristics similar to graphene pieces containing ring defects are energetically feasible. The modeling predicts that CS_xF_y thin films with graphite and fullerene-like characteristics may be obtained for the mentioned concentration range. Accordingly, thin films were synthesized from a graphite solid target and sulfur hexafluoride as reactive gas. In agreement with the theoretical prediction, transmission electron microscopy characterization and selected area electron diffraction confirmed the presence of small ordered clusters with graphitic features in a sample containing 0.4 at.% of S and 3.4 at.% of F.

First-principles calculations are employed to investigate structural, electronic and topological insulating properties of XBi (X = B, Al, Ga, and In) monolayers upon halogenation. It is known that Y-XBi (X = Ga, In, Tl; Y = F, Cl, Br, I) can originate inversion-asymmetric topological insulators with large bulk band gaps. Our results suggest that Y-XBi (X = B, Al; Y = F, Cl, Br, I) may also result in nontrivial topological insulating phases. Despite the lower atomic number of B and Al, the spin-orbit coupling opens a band gap of about 400 meV in Y-XBi (X = B, Al), exhibiting an unusual electronic behavior for practical applications in spintronics. The nature of the bulk band gap and Dirac-cone edge states in their nanoribbons depends on the group-III elements and Y chemical species. They lead to a chemical tunability, giving rise to distinct band inversion symmetries and exhibiting Rashba-type spin splitting in the valence band of these systems. These findings indicate that a large family of Y-XBi sheets can exhibit nontrivial topological characteristics, by a proper tuning, and open a new possibility for viable applications at room temperature.

Graphite-like hexagonal AlN (h-AlN) multilayers have been experimentally manifested and theoretically modeled. The development of any functional electronics applications of h-AlN would most certainly require its integration with other layered materials, particularly graphene. Here, by employing vdW-corrected density functional theory calculations, we investigate structure, interaction energy, and electronic properties of van der Waals stacking sequences of few-layer h-AlN with graphene. We find that the presence of a template such as graphene induces enough interlayer charge separation in h-AlN, favoring a graphite-like stacking formation. We also find that the interface dipole, calculated per unit cell of the stacks, tends to increase with the number of stacked layers of h-AlN and graphene.

We perform a theoretical study of the electronic properties of polyaromatic hydrocarbon (PAH) molecules, as well as benzene and graphene, adsorbed on copper and gold. The PAH molecules studied are coronene (C24H12), circumcoronene (C54H18) and circumcircumcoronene (C96H24), which we consider as gradual approximations to an infinite graphene layer. In order to understand how the size of the adsorbed PAH molecules influences the adsorbate-metal interactions, we generalize the approach used in our earlier study [Phys Rev B, 85 (2012), p. 205423] to decompose the binding energies and net charge transfers into separate contributions from specific groups of atoms, and we then show that the zigzag edges of the PAH molecules interact stronger with the metal surfaces than the armchair ones. We discuss the nature of binding in our model systems as well as the formation of interface dipoles. We show that for all model systems studied here, the charge rearrangement contribution to the interface dipoles can be expressed as the product of the charge involved in the formation of the dipole and the distance between well-defined centers of charge for electron accumulation and depletion. This distance is only marginally dependent on the specific PAH molecules, decreasing slowly with their size.