The development of ultra-high power electronic devices based on 4H-SiC relies on the growth of high-quality thick epitaxial layers. Chloride-based chemical vapor deposition is preferred for this purpose, and in this study we show that optimizing the process also requires a careful selection of hydrocarbons as the carbon source. Propane, a common precursor, limits control over the C/Si ratio at high growth rates, leading to defects and even loss of crystallinity. In contrast, methane offers a wider window for C/Si ratio adjustment, enabling further optimization of the epitaxial growth process. Using methane, an optimal growth rate of 25μm/h is identified at which the minority carrier lifetime is maximized. Additionally, a saturation limit for minority carrier lifetime is observed in layers exceeding a thickness of ∼ 100μm. It is also shown that, although the formation of characteristic surface morphological defects is inevitable, their severity can be controlled by adding additional HCl or increasing the growth rate; however, at a cost of reduced minority carrier lifetime. The growth of 125μm thick epitaxial wafers with methane and propane demonstrates the advantage of using methane as the carbon source. This is evidenced by a smoother surface, better doping uniformity, and nearly double the minority carrier lifetime compared to the propane-grown wafer. These findings highlight the benefits of methane in growing thick 4H-SiC epitaxial layers for high-power devices.
Funding Agencies|Swedish Energy Agency Energimyndigheten [436111]; Swedish Research Council VR [2020-05444]