Efficient perovskite solar modules enabled by a UV-stable and high-conductivity hole transport materialShow others and affiliations
2025 (English)In: Science Advances, E-ISSN 2375-2548, Vol. 11, no 22, article id eadu3493Article in journal (Refereed) Published
Abstract [en]
Ultraviolet (UV) radiation poses a substantial challenge to the stability of prevalent p-i-n (positive-intrinsic-negative) perovskite solar cells (PSCs), demanding more robust hole-transport layers (HTLs) due to light incident from the HTL side. Here, we unveil that commonly used self-assembled monolayer (SAM)-type HTLs suffer from poor UV stability that causes irreversible damage to hole extraction and impairs device stability. To address this issue, we develop a polymeric and UV-stable HTL named Poly-2PACz, which exhibits strong binding to substrates and exceptional UV resistance over SAM-type HTLs. The PSCs blade-coated under ambient conditions using Poly-2PACz HTL achieved a remarkable efficiency of 26.0% and outstanding UV stability. Our cells retain 80% of the initial PCE even after about 500 hours of high-intensity UV illumination [7.7 times higher than that of air mass 1.5 global (AM 1.5G) solar spectrum]. Furthermore, Poly-2PACz exhibits good wettability and high conductance, enabling the fabrication of blade-coated minimodules with an aperture efficiency of 22.2% and excellent uniformity.
Place, publisher, year, edition, pages
AMER ASSOC ADVANCEMENT SCIENCE , 2025. Vol. 11, no 22, article id eadu3493
National Category
Cell and Molecular Biology
Identifiers
URN: urn:nbn:se:liu:diva-214924DOI: 10.1126/sciadv.adu3493ISI: 001497915100030PubMedID: 40435266Scopus ID: 2-s2.0-105007122045OAI: oai:DiVA.org:liu-214924DiVA, id: diva2:1973146
Note
Funding Agencies|National Key Research and Development Program of China [2023YFB3809700]; National Natural Science Foundation of China [52372196]; Open research fund of Suzhou Laboratory [SZLAB-1308-2024-TS007]
2025-06-192025-06-192025-09-22