Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE credits
This master’s thesis is a project performed at Quintus Technologies and investigates the potential for modularization, configurability, and standardization within a product range while also increasing cross usage. To address these challenges, Product Design and Development by Ulrich, Eppinger, and Yang were implemented, combined with Product Platform Concept Exploration Method, to develop a new chassis platform. Design criteria were identified through interviews with employees at the company and functional decomposition of the machines. Based on this framework, multiple chassis module concepts were generated, evaluated, and modelled in 3D CAD.
The final concept transforms the current integrated chassis into a modular chassis consisting of five distinct chassis modules. A shared chassis concept was developed for the BW-3 and BW-2 machines, while the BW-1 machine is using a different chassis concept to get a smaller footprint and avoid over dimensioning. Structural integrity was validated under static load by performing FEM analysis with respect to deformation, stress, and ground forces.
The new chassis concepts exhibit significant economic benefits. Compared to current designs, the new chassis concepts reduce the overall chassis weight by 58% for the BW-3, 57% for the BW-2, and 71% for the BW-1. Hence, the total landed cost, including material, manufacturing, and transportation, is reduced by 36%, 31%, and 44%, respectively. In addition to material and transportation savings, the new chassis concepts enable a wider selection of manufacturers and transport providers.
2026. , p. 80