Independent thesis Advanced level (degree of Master (Two Years)), 20 credits / 30 HE credits
Mesoporous silica of the Santa Barbera Amorphous No. 15 (SBA-15) type is a promising
material for drug delivery due to its ordered pore structure, large surface area
and tunable surface chemistry. For biomedical applications, understanding how the
material degrades in physiological environment is essential, as the degradation influences
both stability and release behaviour. This thesis investigates how aminofunctionalisation
and hydrophobic dye loading affect the degradation of SBA-15 in
Simulated body fluid (SBF). Furthermore, the study evaluates whether Attenuated
Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy can be used
for continuous, real-time monitoring of the degradation process.
SBA-15 was synthesised as both powder and thin films and subsequently functionalised
with aminopropyl groups. In addition, the films were loaded with the hydrophobic
dye 3,3’-dioctadecyloxacarbocyanine perchlorate (DiO) to mimic the loading of
hydrophobic drugs. Material characterisation was performed using Scanning Electron
Microscopy (SEM) and physisorption, while DiO loading in the films was analysed using
Ultraviolet-Visible (UV-Vis) spectroscopy. The films were degraded in simulated body
fluid under dynamic conditions, whereas the powder was analysed using ATR-FTIR
spectroscopy by developing a suitable method and setup for real-time monitoring.
Results show that amino functionalisation slows down the degradation of SBA-15,
likely due to reduced accessibility to pores and and consequently fewer initiation sites
for degradation. DiO loading was found to also decrease the degradation rate, however,
some outliers observed in physisorption measurements are likely attributable to
an insufficiently developed washing protocol for the removal of residual DiO following
degradation. The method development demonstrates that ATR-FTIR spectroscopy
can detect characteristic changes in silica and surface groups during degradation, although
further method refinement is necessary to ensure reliable operation and to
obtain complete and conclusive results.
2026. , p. 57