In this work, we investigate the effect of pulsed substrate biasing on the microstrain, residual stress, and mechanical properties of multi-principal element TiZrNbTa nitride thin films deposited on silicon. The pulsed bias is synchronized with ionized sputtered species and gas ions during reactive high-power impulse magnetron sputtering. This was achieved by exploiting differences in their time-of-flight arising from mass contrasts allowing two distinct bias conditions. Synchronization with gas ions results in films with higher compressive stress (3.1-5.4 GPa) and an indentation hardness of 25 +/- 1 GPa. In contrast, films grown under heavy metal-ion bombardment, despite dominant Ar(+)flux overlap, exhibit lower compressive stress (2.5-3.4 GPa) and slightly higher hardness (29 +/- 1 GPa), independent of ion energies in the range similar to 25-300 eV. These films show minimal variations in metal composition, accompanied by grain coarsening, reduced microstrain, and decreased Ar incorporation below similar to 100 eV. At higher ion energies (similar to 200-300 eV), atomic peening by Ar+ ions dominates, promoting strained growth. Overall, hardness is governed primarily by the metal sublattice composition, with only a weak dependence on strain and grain-size effects. These results demonstrate that synchronized pulsed biasing enables precise control of film properties without external heating.
Funding Agencies|VINNOVA Competence Centre FunMat-II [2022-03071]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [2009 00971]; Knut and Alice Wallenberg Foundation through the Wallenberg Academy Fellows program [KAW-2020.0196]; Swedish Research Council (VR) [2021-03826, 2025-03680, 2025-03760, 2025-03697]; Swedish Energy Agency [52740-1]; Swedish Research Council VR-RFI [2019_00191]; Swedish Research Council [2020-00207]